Hi all.
Does anyone have any pointers on converting a 3D bluray to DCP? The
bluray which is the source in this case has the 3D encoded as MVC. From
my reading, this means the right eye picture is encoded as a separate
stream (which is a delta from the left eye).
Have ripped the bluray with MakeMKV which recognises that it's an MVC-3D
stream. And the file it outputs appears to be the right size so I think
MakeMKV is not dropping the extra stream or something like that.
But I haven't found any software that can display both eyes at present.
DCP-o-matic doesn't see it, and nor does Bino 3D player or VLC.
I'm on Mac but can get hold of a Windows box if I need to.
Anyone encountered this before?
Many thanks,
Jim
Hi John,
approx one minute in 30min sounds like a 24/25fps issue. That IS usually no issue, you are free to generate a DCP with either 24 or 25 fps in both SMPTE or INTEROP format - except if you operate a Dolby DSS100/DSP100, which is not able to play 25fps. There are still quite a few DSS100/DSP100 around, so if there is a chance your DCP might end up on one of those, you should also create a 24fps version.
This should not occur with a single (interleaved video/audio) file of content, so I assume you use more than one content file?
- Carsten
> Am 31.07.2017 um 08:00 schrieb John Martin <John(a)trinitytheatre.net>:
>
> Hi Carsten,
>
> Thank you for coming back so quickly – the answer appears to be framerate – the software was prompting me to change it – but if I ignore that it remains the same length.
>
> I will test it when I am in the theatre today.
>
> Thanks again.
>
> Best regards
>
> John Martin
> Artistic Director
>
> Phone: 07762 587768
> Website: www.trinitytheatre.net <http://www.trinitytheatre.net/>
> Get more info at: <image001.png> <http://www.facebook.com/trinitytheatre/TRINITY-SRV01/Users/darren.smallman/…> <image002.png> <http://www.linkedin.com/company/trinity-theatre> <image003.png> <http://twitter.com/trinitytheatre>
>
> From: Carsten Kurz [mailto:audiovisual@t-online.de <mailto:audiovisual@t-online.de>]
> Sent: 30 July 2017 14:19
> To: John Martin; dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>
> Subject: Re: [DCP-o-matic] DCP issue
>
> Open timeline view and check wether there is an overlapping/longer audio track, or subtitles. If any non-video track is longer than the video, DOM creates black to match overall length. This could also be caused by framerate changes.
> Are you sure that black is not part of the source content? If it is, you can apply trimming to get rid of it.
>
> - Carsten
>
> ... gesendet von unterwegs
>
> Am 30.07.2017 um 14:37 schrieb John Martin via DCPomatic <dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>>:
>
> Hi,
>
> I am using DCP -o – matic to create a DCP from a video file that runs 30 minutes. In the authoring process it is adding an extra minute of black at the end.
>
> As this is part of a scheduled show it is causing problems with the timing of what comes afterwards as well as causing our projectionists to think that there has been some sort of failure!
>
> Would you know what is causing this and how I might solve the problem?
>
> I look forward to hearing from you.
>
>
> Best regards
>
> John Martin
> Artistic Director
>
> Phone: 07762 587768
> E-mail: john(a)trinitytheatre.net <mailto:john@trinitytheatre.net>
> Website: www.trinitytheatre.net <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.trini…>
> Get more info at: <image001.png> <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.faceb…> <image002.png> <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linke…> <image003.png> <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitter.c…>
> <image004.jpg> <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrinityt…>
> Trinity Theatre, Church Road, Tunbridge Wells, Kent TN1 1JP.
> Switchboard: 01892 678 670. Box office: 01892 678678.
> enquiries(a)trinitytheatre.net <mailto:enquiries@trinitytheatre.net>
>
> <image006.png>Trinity Theatre and Arts Centre Ltd
> Registered Charity Number 1054547
> Registered Company Number 3179063
>
> This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Trinity Theatre.If you are not the intended recipient of this email and its attachments, you must take no action based upon them, nor must you copy or show them to anyone. Please contact the sender if you believe you have received this email in error.
>
> _______________________________________________
> DCPomatic mailing list
> DCPomatic(a)carlh.net <mailto:DCPomatic@carlh.net>
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic <http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic>
Hi,
I am using DCP -o - matic to create a DCP from a video file that runs 30 minutes. In the authoring process it is adding an extra minute of black at the end.
As this is part of a scheduled show it is causing problems with the timing of what comes afterwards as well as causing our projectionists to think that there has been some sort of failure!
Would you know what is causing this and how I might solve the problem?
I look forward to hearing from you.
Best regards
John Martin
Artistic Director
Phone: 07762 587768
E-mail: john(a)trinitytheatre.net<mailto:john@trinitytheatre.net>
Website: www.trinitytheatre.net<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.trini…>
Get more info at: [icon_16_facebook] <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.faceb…> [icon_16_linkedin] <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linke…> [icon_16_twitter] <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitter.c…>
[One-Man-Email-Banner]<https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Ftrinityt…>
Trinity Theatre, Church Road, Tunbridge Wells, Kent TN1 1JP.
Switchboard: 01892 678 670. Box office: 01892 678678.
enquiries(a)trinitytheatre.net<mailto:enquiries@trinitytheatre.net>
[Description: Trinity Logo Magenta (WinCE)]Trinity Theatre and Arts Centre Ltd
Registered Charity Number 1054547
Registered Company Number 3179063
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Trinity Theatre.If you are not the intended recipient of this email and its attachments, you must take no action based upon them, nor must you copy or show them to anyone. Please contact the sender if you believe you have received this email in error.
Hi,
I am shopping for purchase a solution to generate KDMS for bluray disk.
Please advice
Thanks!
Kiran Gogeneni
347 307 4457 (Mobile)Make your Acton's reflect your words
Hi…
…not the first time I do that but today I fail…
DCP-O-Matic 2.10.5 git 61b5d4ad8 on Ubuntu 14.04.
I have a dvd to convert to dcp.
First thing I did was concatenate the 4 vob into one file :
cat VTS_01_1.VOB VTS_01_2.VOB VTS_01_3.VOB VTS_01_4.VOB | ffmpeg -i -
brialy.mp4
Then I use some personal script to get some kind of 5.1 sound → file
becomes brialy_51.mov
Now in DCP-o-Matic conversion always stops @ same number of images (
about 4500 ).
There's some warning in log @ line 2407 FFmpeg: Warning: data is not
aligned! This can lead to a speedloss
Files attached are log, ffprobe.log andmy script for 5.1 upmix.
I suspect more has to be done regarding « concatenate » the vob into one
single.
Any hints / help welcome.
Best regards,
Gerald
The Desktop PC that we use to run DCP-o-matic just died (smoke started
pouring out of it actually) does anyone have recommendations on PC
specifications, or a make/model that they've had good luck with?
Thanks in Advance
J-sun Bailey
Hi all.
Every now I get a BD that needs to be converted to DCP, usually because the
content isn't out on DCP or it's a pre-release for a special screening of
some sorts.
This time the BD content actually has a Dolby TrueHD 7.1 track, which is
the obvious choice, as the screening is in a 7.1 room.
As I usually do, I create a mkv file with subtitles and the desired track
by using MakeMKV.
DOM sees both the subtitle track and the 7.1 audio track which I can then
map accordingly when I set ''12 - 7.1/HI/VI
However, when clicking the 'analyze audio' button, everything comes to a
halt.
After churning for 3 hours, the ETA was 273 hours! :D
That is somewhat excessive and I am thinking there might be a bug
somewhere, as I can see Carsten and others have mentioned in the forums
(DOM and Film-Tech) that they successfully have used Dolby TrueHD tracks in
their DCPs.
I'd rather not waste the time encoding the DCP if the levels are too high,
so maybe someone can comment on this behavior?
DOM v2.10.5
Win10 Pro
Best regards,
Jonathan
Hi
what to select as color space when converting something the filmmaker
announced as.
YUV422 10bit avi
If found lot's of info at [1] which is way beyond my knowledge on the
color spaces topic.
[1] https://en.wikipedia.org/wiki/YUV
--
Markus Kalb
Filmkreis an der TU Darmstadt
Filmfest Weiterstadt