- DCP-o-matic users - lists.dcpomatic.com

Re: [DCP-o-matic] Christie IMB certificates

by lilian lefranc

Hi, Here you are! Sorry for the delay. Lilian Le 30/08/2018 11:27, Jude Chidebe a écrit : > Thank you Lilian. > > I am very grateful for your swift response. > > The cinema chain just gave me the serial numbers of their servers for > their another location. Would you please indulge me one more request? > > _/Serial Nos/_ > _/ > /_ > 0000000F77AA > 0000000D0BCE > 0000000D1F9A > 0000000F1102 > > > Yes I would go ahead and ask Christie for an account, hopefully that > would not take very long. > I do have some other cinemas yet to send me their DCI readiness sheets > and some of them might also use Christie servers. > > I once again express my gratitude. > > Best regards. > > > *Jude Chidebe* > Head of Post Production & Studio Facilities > m: (+234) 09062657246 > e: j.chidebe(a)trinostudios.com <mailto:enquiries@trinostudios.com> > __ > > *TRINO STUDIOS LTD.* > 4 Olumo Road, Parkview Estate, Ikoyi, Lagos, Nigeria > t: (+234) 01-2951248 > e: enquiries(a)trinostudios.com <mailto:enquiries@trinostudios.com> > w: www.trinostudios.com <http://www.trinostudios.com> > > > >> On 30 Aug 2018, at 8:50 AM, lilian lefranc <lilianlef(a)gmail.com >> <mailto:lilianlef@gmail.com>> wrote: >> >> Hi, >> >> Please find them enclosed. >> Why don't you ask an account to Christie to get them easily? >> >> Best regards, >> >> Lilian >> >> Le 29/08/2018 21:04, Jude Chidebe a écrit : >>> Hello Lilian. >>> >>> Can you help me get certificates for *Christie IMB-S2*. >>> >>> We are a distributor sending out DCPs to a theatre. >>> >>> /_Serial Nos:_/ >>> /_ >>> _/ >>> 9C9D0013917B >>> 4503001F545B >>> 0000000F7AB9 >>> >>> >>> *Jude Chidebe* >>> Head of Post Production & Studio Facilities >>> m: (+234) 09062657246 >>> e: j.chidebe(a)trinostudios.com <mailto:enquiries@trinostudios.com> >>> __ >>> >>> *TRINO STUDIOS LTD.* >>> 4 Olumo Road, Parkview Estate, Ikoyi, Lagos, Nigeria >>> t: (+234) 01-2951248 >>> e: enquiries(a)trinostudios.com <mailto:enquiries@trinostudios.com> >>> w: www.trinostudios.com <http://www.trinostudios.com/> >>> >>> >>> >> >> <IMB-S2_0000000F7AB9_sha256.pem><IMB-S2_9C9D0013917B_sha256.pem><IMB-S2_4503001F545B_sha256.pem> >

6 years, 8 months

1
0
0 0

Re: [DCP-o-matic] Christie IMB certificates

by lilian lefranc

Hi, Please find them enclosed. Why don't you ask an account to Christie to get them easily? Best regards, Lilian Le 29/08/2018 21:04, Jude Chidebe a écrit : > Hello Lilian. > > Can you help me get certificates for *Christie IMB-S2*. > > We are a distributor sending out DCPs to a theatre. > > /_Serial Nos:_/ > /_ > _/ > 9C9D0013917B > 4503001F545B > 0000000F7AB9 > > > *Jude Chidebe* > Head of Post Production & Studio Facilities > m: (+234) 09062657246 > e: j.chidebe(a)trinostudios.com <mailto:enquiries@trinostudios.com> > __ > > *TRINO STUDIOS LTD.* > 4 Olumo Road, Parkview Estate, Ikoyi, Lagos, Nigeria > t: (+234) 01-2951248 > e: enquiries(a)trinostudios.com <mailto:enquiries@trinostudios.com> > w: www.trinostudios.com <http://www.trinostudios.com> > > >

6 years, 8 months

1
0
0 0

[DCP-o-matic] 3D problem since DCP-o-matic 2.12.2 version

by th.journet＠laposte.net

Hi Carl, I just wanted to report a bad bug that occured in 2.12.2 version and that goes on til the last one : 2.12.9 version. DCP o Matic crashes each time you want to make a 3D DCP (I tested Linux and windows versions and it's the same) I made several test and the only solution to make a 3D DCP is to downgrade to version 2.10.5 that works without any problem. Regards, Thierry JOURNET

6 years, 8 months

3
2
0 0

[DCP-o-matic] DCP Package for local drive in movie theater - HELP

by UP NORTH OUTDOOR MADNESS

Hello, I am having some issues, this was my first time creating a DCP set of files as a buddy wanted me to make a commercial for a local drive in movie theater, so I made the MP4 video out of still pictures and logos and some backgrounds and music. I then took my finished MP4 and used DCP-o-matic to convert to the files needed on the Barco DP2K-23B projector used at the theater well we play it and the whole video is highlighted like pink. So then i am confused and download the player to check it at home but it plays the same file with no pink at home so now I am lost hoping the player would do the same thing so i could trouble check. Any thoughts on what I should do?

6 years, 8 months

6
10
0 0

[DCP-o-matic] Merging test versions into stable

by Jim Dummett

Hi Carl. I'm just wondering how/when you go about merging commits from the test version into stable branch? For example, a feature request I made (https://dcpomatic.com/mantis/view.php?id=1284) was implemented in test version 2.13.19. Since then, stable 2.12.6 has been released but does not contain this commit. Stable releases since 2.12.2 are bug fix releases. However, what confuses me is that there are many more bug fixes which have been committed to the test branch. So there's obviously some criteria for what makes it through to stable and what doesn't. If you can be bothered, can you explain the release strategy a little bit? And do you have a rough timeline of when the next stable release is likely to be? Just asking as I'm planning ahead to an upcoming festival and wondering what version to settle on. Many thanks, Jim

6 years, 8 months

2
3
0 0

[DCP-o-matic] Christie cert database?

by Jim Dummett

Hi all. Is there anyone out there who has access to Christie's certificate database and would be willing to look up a couple of certs for me? Have a show on Friday and we're using mobile projectors which are currently locked in a warehouse in middle of nowhere, so it'd be a pain to get them out to extract the certs from them. For whatever reason, the owner of the projectors doesn't have a copy of the certs. If anyone can help would be amazing! Many thanks, Jim

6 years, 9 months

2
2
0 0

[DCP-o-matic] Strange colors artefacts since PREMIERE CC last version

by Septieme Factory

Hi, I have been making DCP for a wile and since the last Premiere CC update I have purple artefacts in blue color. Does anyone have notice that and know a way to avoid it ? (Here below timeline shots from premiere) Thanks in advance for your help. Jean The dcp Omatic image after processing : (purple artefacts on the top left) Original footage :

6 years, 9 months

5
9
0 0

[DCP-o-matic] DCP-o-matic 2.12.8 is released

by Carl Hetherington

Hi all, DCP-o-matic 2.12.8 is now available from https://dcpomatic.com/download This is a bug-fix release which corrects some problems with 2.12.6, and provides a couple of small improvements: Fix failure to load image files with non-ASCII pathnames. Fix some reel length errors at the end of transcodes. Prevent the introduction of negative trims (which cause encoding errors). Assume .jpf files are JPEG2000 images. Fix the update checker (#1338). Speed up the timeline in some cases. Add build for Fedora 28. Special thanks to our subscribers and supporters! Kind regards, Carl

6 years, 9 months

1
0
0 0

Re: [DCP-o-matic] Strange colors artefacts since PREMIERE CC last version

by cjflynn＠digitaltesttools.com

Désolé que je ne peux pas aider plus…I haven’t touched Premiere since 1990s! The never changing rule: Entertainment Technology Debug Question One: What else has changed? Entertainment Technology Debug Question Two: What else has changed? Of course, you wonder if DCP O Matic has changed…? When I google Premiere update color shift – many answers, some recent, many old. =-=-= The right color space depends on the capabilities of the equipment that you are using, the client’s release format, and importantly for you, the archive format. A library has value only if it keeps up with current trends. For example, a VHS format and color space has little value today – it is unwatchable and cannot be upgraded easily or well. And more than one streaming service is demanding P3 4K minimum. All trends are toward more and better pixels: How soon 2020? The best that the client can afford today! But you are the client!!! The trend in the standards world is toward a high grade mezzanine format for archiving and a lot of metadata for different iterations and evolutions. SMPTE ST2065 – Academy Color Encoding Specification (ACES),and ST 2067 – Interoperable Mastering Format (IMF) detail the entire path from production to various forms of exhibition…and those standards continue to be worked on. I don’t have a specific answer to “Right Color Space for Premiere” but it seems that the answer is a constantly improving workflow for deliverables that are going to be under constant pressure for better and interchange software that will help advance that. Regards in return…Charles > On 9 Jul 2018, at 10:27, Septieme Factory <jean.heches(a)wanadoo.fr> wrote: > > Hi Flynn, > > Thanks for answering. > > Except the new Premiere version I haven't change anything. I am even using the same old templates I have used before for other previous export working fine. > > What should be the right color space in premiere ? > > > Best regards > Jean > > Here below my sequence setup : > > > <Capture d’écran 2018-07-09 à 19.21.30.png> >> Le 9 juil. 2018 à 18:01, CJ | Digital Test Tools <cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com>> a écrit : >> >> Just wondering, Jean... >> >> Did anything else change in your setup coinciding with the last Premiere version? Monitors? Project parameters?...or perhaps did Premiere change you into a different color space – 709 to P3? Looking at your Tiff files on 2 different P3 screens, they don’t look that different though I can see from the histograms that there are shifts in all the colors. >> >> Thus, I wonder if there are other things going on in the set up. >> >> C J Flynn >> >> Typeos from CJ's iPad >> >>> On Jul 8, 2018, at 1:43 PM, Carl Hetherington via DCPomatic <dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>> wrote: >>> >>> On Sun, 8 Jul 2018 22:09:48 +0200 >>> Septieme Factory via DCPomatic <dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>> wrote: >>> >>>> Hi, >>>> >>>> I have been making DCP for a wile and since the last Premiere CC update I have purple artefacts in blue color. >>>> Does anyone have notice that and know a way to avoid it ? >>> >>> Are you going into DCP-o-matic with TIFF files? Do you have TIFFs from the working and non-working versions of Premiere? >>> >>> Kind regards, >>> Carl >>> >>> _______________________________________________ >>> DCPomatic mailing list >>> DCPomatic(a)carlh.net <mailto:DCPomatic@carlh.net> >>> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic >

6 years, 9 months

1
0
0 0

[DCP-o-matic] Re-using source video with re-encoding

by Tom Haines

Does anyone know if it's possible to build a DCP with DCP-o-matic that repeats a source file a number of times, but only encodes it once? So essentially the CPL would point to the same asset multiple times. I'm adding the source video multiple times in the content tab, and then selecting "split by video content" for reels. This still re-encodes each instance of the source video. -- TOM HAINES Screenings | Originals Publicity M: 310.467.3069 | thaines(a)netflix.com 5808 W. Sunset Blvd, 5th fl | Los Angeles, CA 90028 <https://maps.google.com/?q=5808+W.+Sunset+Blvd,+5th+fl+%7C+Los+Angeles,+CA+…>

6 years, 9 months

5
9
0 0

[DCP-o-matic] WARNING: Butler video buffers reached frames

by Farb Kiste

Hi all, I just made made a DCP an got the following warnings in logfile for which I could’nt find any explanation. Would be very happy is some of you can help me out if these warnings affect the quality of the final DCP and if I can assume that the DCP will be OK. So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 19808) So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 20035) So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 20035) And I also got a lot of these messages: Sa 16 Jun 23:05:52 2018: Writer full; pushes 2229 to disk while awaiting 1948 Sa 16 Jun 23:05:52 2018: Writer full; pushes 2230 to disk while awaiting 1948 … … Thank you in advance and have a nice day. Christian

6 years, 10 months

3
2
0 0

[DCP-o-matic] DCP Error Message

by Bethany Nelson

Hi Carl, I keep getting this error message from dcp. It's the first time I've seen this message and I've been using DCP for over a year now.. I've tried on 2 different computers. Both PC and Mac, and both are giving me the same error message. I'm in a bit of a crunch as I have ads that have to start playing at our theatre before tomorrow. Any help is greatly appreciated! Thanks, Bethany Nelson I Assistant Manager Office: 931.762.5885 I Cell: 931.242.1224 I bethany(a)nelsonavp.com <mailto:rickylee@nelsonavp.com> Nelson Studios<http://www.nelsonavp.com/> I 2356 Springer Road I Lawrenceburg, TN 38464

6 years, 11 months

3
8
0 0

[DCP-o-matic] dcpomatic player 2 stalling when opening in mac?

by joaquin d

Hi all, I'm trying to open DCPomatic Player 2 (version 2.12.5) on a mac i7 with current software and it keeps hanging on "Verifying..." but then eventually opens after about 5 minutes. I've used it before and not had this issue. I just re-installed and same issue. Hmm. Anyone else with experiencing this? Thanks! Joaquin

6 years, 11 months

5
6
0 0

[DCP-o-matic] Xml sub & sign

by Lennert De Taeye

Hello, I’m running into an issue with a xml subtitle file. Dcp-o-matic (2.12.4) seems to be unable to read the & sign in the xml file. In the XML file I have; <dcst:Subtitle SpotNumber="13" TimeIn="00:07:01:05" TimeOut="00:07:07:18" FadeUpTime="00:00:00:00" FadeDownTime="00:00:00:00"> <dcst:Text Hposition="0.0" Halign="center" Valign="bottom" Vposition="12.5" Direction="ltr">When house & techno arrived in the UK,</dcst:Text> <dcst:Text Hposition="0.0" Halign="center" Valign="bottom" Vposition="8.0" Direction="ltr">people started throwing illegal parties.</dcst:Text> In DCP-o-matic I only see the second sentence (the first sentence is ignored); people started throwing illegal parties. Best regards, Lennert

6 years, 11 months

5
5
0 0

[DCP-o-matic] Encoding servers: error during async_read

by Wolfgang Woehl

Got 1G lan, 1 master, 3 slaves. Slaves are E5-2687W’s @ 3 GHz. Master is seeing all 3 slaves in encoding servers list (with threads info 48). Source material is 12-bit tiffs with 9 MB each. We’re seeing a lot less throughput than expected: ~ 6 fps. On the slaves status says ~ 0.1 - 0.2 fps respectively. Log messages on the slaves’ status panes have a lot of “error during async_read ([numbers 10009 and 10054 mostly])” messages. Occasionally logs list an encoded frame with roughly these numbers: receive up to 23 seconds, encode 1 second, send up to 1 second. What could we check? Kind regards, Wolfgang

6 years, 11 months

5
10
0 0

[DCP-o-matic] Problem - cinema

by Dušan Pukl

Hi, I made dcp format for the cinema, but in the cinema they can't play it correctly. The colors are different (the picture below). I don't have already any idea how to fix it. Could you please help me? Thank you! Dusan

7 years

2
1
0 0

Re: [DCP-o-matic] Microsoft OneDrive

by Carsten Kurz

> Could not make DLP > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > “C:\Users\Galle\onedrive\documents\” This seems to be a Microsoft OneDrive issue, so for now, don't create DCP-o-matic projects within a OneDrive folder. Create projects/DCPs in a different directory, and if for some reason you want them to be synced with OneDrive, copy/move them to OneDrive later after finishing. - Carsten

7 years

1
0
0 0

Re: [DCP-o-matic] (no subject)

by Carl Hetherington

Hi there, When you did File -> New and you saw this box: https://dcpomatic.com/manual/html/screenshots/video-new-film.png what does it say next to "create in folder" and what did you put in for "film name" ? Sorry for all the questions --- we are just trying to work out what is going wrong. All the best, Carl On Wed, 18 Apr 2018, Gallery Cinemas wrote: > > I started a new file > found what I wanted in pictures > Clicked on it, and everything was fine until I went to create > > > > the file is in location C:\galle\documents\joel > Opens with Photos (.jpg) > 324.9 kb > 2310x864 > > > I have photographed a number of signs & poster etc, saved them to this file and it has always worked, until now. > > Sorry, this is the best I can do now > > Joel K. Pell > > Gallery Cinemas > 396 Old Hartford Rd. > Colchester, Ct. 06415 > > tel: 860-537-6682 > fax: 860-537-6645 > > email: gallerycinemas(a)sbcglobal.net > > > On Tuesday, April 17, 2018 6:34 PM, Carl Hetherington <cth(a)carlh.net> wrote: > > > What folder did you specify when you did File -> New ? > > On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote: > > > I would need you to send instructions on how to do that > > > > Joel Pell > > Gallery Cinemas > > > > > > > > > > On Tue, Apr 17, 2018 at 6:19 PM -0400, "Carl Hetherington" <cth(a)carlh.net> wrote: > > > > Can you send me the metadata.xml file from inside your project's folder? > > > > On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote: > > > > > yes, it happened Make DLP, that's where that message popped up > > > > > > Joel Pell > > > Gallery Cinemas > > > > > > > > > > > > > > > On Tue, Apr 17, 2018 at 6:09 PM -0400, "Carl Hetherington" wrote: > > > > > > Were you creating a new project? Adding content? Did you just click "Make > > > DCP"? > > > > > > On Tue, 17 Apr 2018, Gallery Cinemas wrote: > > > > > > > Sorry, always worked fine for me. Then it didn't work. I deleted it and downloaded again, but got the same message > > > > > > > > Joel K. Pell > > > > > > > > Gallery Cinemas > > > > 396 Old Hartford Rd. > > > > Colchester, Ct. 06415 > > > > > > > > tel: 860-537-6682 > > > > fax: 860-537-6645 > > > > > > > > email: gallerycinemas(a)sbcglobal.net > > > > > > > > > > > > On Tuesday, April 17, 2018 5:10 PM, Carl Hetherington wrote: > > > > > > > > > > > > Hi there, > > > > > > > > Can you describe what you did that lead up to this error? > > > > > > > > Thank you, > > > > Carl > > > > > > > > On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote: > > > > > > > > > > > > > > I am having issues with your program > > > > > > > > > > > > > > > > > > > > Could not make DLP > > > > > > > > > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > > > > > > > > > > “C:\Users\Galle\onedrive\documents\” > > > > > > > > > > > > > > > > > > > > Sent from Mail for Windows 10 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

7 years

1
0
0 0

Re: [DCP-o-matic] (no subject)

by Carsten Kurz

Am 17.04.2018 um 18:00 schrieb Gallery Cinemas via DCPomatic: > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > “C:\Users\Galle\onedrive\documents\” Could this be a specific onedrive issue? Sounds as if he wants to overwrite an existing DCP, but instead of the DOM confirm overwrite dialog, onedrive does something on it's own? Joel - can you try to create that project somewhere else, e.g. on your desktop? - Carsten

7 years

1
0
0 0

Re: [DCP-o-matic] (no subject)

by Carl Hetherington

Can you send me the metadata.xml file from inside your project's folder? On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote: > yes, it happened Make DLP, that's where that message popped up > > Joel Pell > Gallery Cinemas > > > > > On Tue, Apr 17, 2018 at 6:09 PM -0400, "Carl Hetherington" <cth(a)carlh.net> wrote: > > Were you creating a new project? Adding content? Did you just click "Make > DCP"? > > On Tue, 17 Apr 2018, Gallery Cinemas wrote: > > > Sorry, always worked fine for me. Then it didn't work. I deleted it and downloaded again, but got the same message > > > > Joel K. Pell > > > > Gallery Cinemas > > 396 Old Hartford Rd. > > Colchester, Ct. 06415 > > > > tel: 860-537-6682 > > fax: 860-537-6645 > > > > email: gallerycinemas(a)sbcglobal.net > > > > > > On Tuesday, April 17, 2018 5:10 PM, Carl Hetherington wrote: > > > > > > Hi there, > > > > Can you describe what you did that lead up to this error? > > > > Thank you, > > Carl > > > > On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote: > > > > > > > > I am having issues with your program > > > > > > > > > > > > Could not make DLP > > > > > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > > > > > > “C:\Users\Galle\onedrive\documents\” > > > > > > > > > > > > Sent from Mail for Windows 10 > > > > > > > > > > > > > > > > > > > > > > > > > >

7 years

1
0
0 0

Re: [DCP-o-matic] (no subject)

by Carl Hetherington

Were you creating a new project? Adding content? Did you just click "Make DCP"? On Tue, 17 Apr 2018, Gallery Cinemas wrote: > Sorry, always worked fine for me. Then it didn't work. I deleted it and downloaded again, but got the same message > > Joel K. Pell > > Gallery Cinemas > 396 Old Hartford Rd. > Colchester, Ct. 06415 > > tel: 860-537-6682 > fax: 860-537-6645 > > email: gallerycinemas(a)sbcglobal.net > > > On Tuesday, April 17, 2018 5:10 PM, Carl Hetherington <cth(a)carlh.net> wrote: > > > Hi there, > > Can you describe what you did that lead up to this error? > > Thank you, > Carl > > On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote: > > > > > I am having issues with your program > > > > > > > > Could not make DLP > > > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > > > > “C:\Users\Galle\onedrive\documents\” > > > > > > > > Sent from Mail for Windows 10 > > > > > > > > > > > > > >

7 years

1
0
0 0

Re: [DCP-o-matic] (no subject)

by Carl Hetherington

Hi there, Can you describe what you did that lead up to this error? Thank you, Carl On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote: > > I am having issues with your program > > > > Could not make DLP > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists: > > “C:\Users\Galle\onedrive\documents\” > > > > Sent from Mail for Windows 10 > > > > >

7 years

1
0
0 0

[DCP-o-matic] (no subject)

by Gallery Cinemas

I am having issues with your program Could not make DLP Boost::Filesystem::Create_directory:Can not create a file when the file already exists: “C:\Users\Galle\onedrive\documents\” Sent from Mail for Windows 10

7 years

1
0
0 0

[DCP-o-matic] Is it possible to re-wrap DCPs in DCP-o-matic?

by joaquin d

Hi, I have a short un-encrypted DCP that passes my quality control tests and plays in DCPomatic but won't ingest on a Sony Server or TMS. (I didn't author it. It was authored by Clipster by a NY office of a major distributor/ DCP authoring...the NY branch often has issues) I'm wondering if it is possible to re-wrap the DCP in DCPomatic using the DCP assets of the DCP I have...the assets seem good. Thanks! Joaquin

7 years

4
8
0 0

[DCP-o-matic] DCP question

by james＠discover.film

Hi, Thanks so much for the free software - I will make sure we donate towards it. I do have a question regarding the making of DCPs - we are struggling with creating them for a cinema. The bottom right hand side of the DCP when projected on to the screen curves up a little. Could this be to do with not converting the DCP into the correct ratio or the fact the cinema has a curved screen? For example a 1.78 ratio DCP has been made into 2.39 scope as I thought it selected them automatically. I hope you can help me understand. Best, James Discover.film Somerset House, Strand London WC2R 1LA https://discover.film <https://discover.film/>

7 years

5
13
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

DCP-o-matic users