It has transpired that around noon GMT on 16th April the DCP-o-matic project in
our bug database was deleted by actors unknown. It appears that they gained
administrator rights in our installation of the Mantis bug tracker.
If you have a Mantis account and you use the same password on any other sites
you are strongly advised to change this password everywhere it is used.
At the moment I don't think anything else on dcpomatic.com was compromised.
The bug tracker has been restored from a backup and I don't think much has been
lost. If you added a bug or comment since 16th April you will need to re-add
it.
Apologies for any inconvenience.
Kind regards,
Carl
Thank you for your script, Wolfgang.
Today, I finally managed to install it on my machine and ran the inspection
using it to find out I had no errors with my InterOP DCP I had created
earlier this week.
It gave me many hints related to Digital Cinema Naming Convention, but no
errors.
By the way, I'd like to give you a feedback on what your script might not
have caught, but since I have the trial version of easyDCP player, it won't
show me what the actual warning it gave me. So, unfortunately, I don't
think I can help you about it.
Thank you all for your replies once again!
Best regards,
S.N.
On Tue, Mar 21, 2017 at 10:35 AM, Carsten Kurz <audiovisual(a)t-online.de>
wrote:
> As a side note, today I created a basic DCP with DOM 2.10.9 Mac and played
> it with the most current demo version of EazyDCP Player Mac. I did not get
> a warning and was able to play the file (as much as the demo allows).
>
> There are not many ways to create a formally screwed DCP with DCP-matic.
> To the extent that currently, if a software player complains about a formal
> issue, I'd blame the software player first.
> There has been a similar issue once with the Doremi Cineplayer. Yes, if in
> doubt, try to use dcp_inspect.
>
> - Carsten
>
> ... gesendet von unterwegs
>
> Am 20.03.2017 um 18:11 schrieb Shanu Novic <shanunovic(a)gmail.com>:
>
> Thank you all for your replies.
>
> C J,
>
> The version I have used is 2.10.2 git a23d6161d9, which I think is the
> current version from the website.
> Thank you very much for your kind offer to help.
>
> Carsten,
>
> I think that's an known issue with easyDCP Player, and I'm surprised they
>> didn't fix it yet. I can't look up earlier posts describing the problem
>> from here. Maybe someone else can.
>
>
> I was thinking that might be the case, but I could not find any recent
> posts about it in dcp-o-matic forums that I started to have a doubt.
>
> S.N.
>
> On Tue, Mar 21, 2017 at 12:00 AM, cjflynn(a)digitaltesttools.com <
> cjflynn(a)digitaltesttools.com> wrote:
>
>> Shanu
>>
>> Could you please tell the version number of DCP-o-Matic that you used,
>> which got that error? If I have that version, I can try a DCP and see if I
>> get the same results.
>>
>> C J
>> Cinema Test Tools <http://cinematesttools.com>
>>
>>
>> On Mar 20, 2017, at 02:25 000AM, Carl Hetherington via DCPomatic <
>> dcpomatic(a)carlh.net> wrote:
>>
>> Hi Shanu,
>>
>> It could be. I guess there's no way to be sure. Someone else on the list
>> might have an idea... Sorry I can't be more help.
>>
>> All the best,
>> Carl
>>
>> On Sun, 19 Mar 2017, Shanu Novic wrote:
>>
>> Thanks for your reply.
>>
>> I just created a DCP using DCP-o-matic, but when I try to play it with
>> easyDCP trial version, it gives me warnings.
>> It says "Issues have been detected. For a full report, please license the
>> commercial edition with issue report enabled", so I don't know what the
>> exact
>> issue is.
>>
>> Do you think it's the XML one that's listed under FAQ on your website?
>> Does it always happen with DCPs created using DCP-o-matic?
>>
>> On Tue, Mar 14, 2017 at 7:56 PM, Carl Hetherington <cth(a)carlh.net> wrote:
>> On Tue, 14 Mar 2017 16:34:41 +0900
>> Shanu Novic via DCPomatic <dcpomatic(a)carlh.net> wrote:
>>
>> Hello everyone,
>>
>>
>> Hi Shanu,
>>
>> I had a quick question.
>>
>> What's the difference between DCP-o-matic and Davinci Resolve (without
>> using easyDCP plugin) in terms of how they convert source material into
>> jpeg2000 (XYZ color space)?
>>
>> My master video is Apple Prores HQ.
>>
>> Basically, I have used Davinci Resolve (without using easyDCP plugin) and
>> openDCP to make a DCP in the past, and I was successful, but Davinci
>> Resolve crashes randomly sometimes these days, so I wanted to give
>> DCP-o-matic a shot.
>>
>>
>> I'm afraid I don't know what Resolve does. In theory they should be
>> the same, since there is a pretty-well defined mathematical operation
>> that should be followed to convert video to XYZ.
>>
>> Someone else on the list might know...
>>
>> I guess I can just do a test conversion with DCP-o-matic and check the
>> result with my eyes, but I thought it wouldn't hurt to ask...
>>
>>
>> That would be a good starting point, I think.
>>
>> All the best,
>> Carl
>>
>>
>>
>> _______________________________________________
>> DCPomatic mailing list
>> DCPomatic(a)carlh.net
>> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>>
>>
>>
>
Hello everyone,
I had a quick question.
What's the difference between DCP-o-matic and Davinci Resolve (without
using easyDCP plugin) in terms of how they convert source material into
jpeg2000 (XYZ color space)?
My master video is Apple Prores HQ.
Basically, I have used Davinci Resolve (without using easyDCP plugin) and
openDCP to make a DCP in the past, and I was successful, but Davinci
Resolve crashes randomly sometimes these days, so I wanted to give
DCP-o-matic a shot.
I guess I can just do a test conversion with DCP-o-matic and check the
result with my eyes, but I thought it wouldn't hurt to ask...
If anyone with the knowledge could kindly inform me about it, I'd be much
appreciated!
Best regards,
S.N.
Hi There,
No need for help at this point. I found the package. The directory
structure is a little different. I just had to look.
Cheers.
scott.
-----Original Message-----
From: Heddon Greta Drive-in [mailto:admin@drive-in.com.au]
Sent: Sunday, 19 March 2017 7:47 PM
To: 'dcpomatic(a)carlh.net'
Subject: No Packages Found
Hi Carl.
I hope all is well.
I am trying to use your program for the first time.
I obtained it from the classifications division and installed it from
the business card USB they circulated.
I am following the instructions in the word file they included.
I am trying to make a silent DCP with a "No Smoking announcement of 10
seconds.
It all seems to work OK but when I try to load the package onto the GDC
Server I can see the folder I have made but when I try to ingest I get
the message "No Packages Found".
I have looked in the folder. It seems to have files with bits in them...
Just wondering if there might be anything silly I could have done??
Appreciate your thoughts.
Many thanks,
Scott.
Kind Regards,
Scott Seddon
Heddon Greta Drive-in
Scotty's Cinemas Pty Ltd
Hi Carl.
I hope all is well.
I am trying to use your program for the first time.
I obtained it from the classifications division and installed it from
the business card USB they circulated.
I am following the instructions in the word file they included.
I am trying to make a silent DCP with a "No Smoking announcement of 10
seconds.
It all seems to work OK but when I try to load the package onto the GDC
Server I can see the folder I have made but when I try to ingest I get
the message "No Packages Found".
I have looked in the folder. It seems to have files with bits in them...
Just wondering if there might be anything silly I could have done??
Appreciate your thoughts.
Many thanks,
Scott.
Kind Regards,
Scott Seddon
Heddon Greta Drive-in
Scotty's Cinemas Pty Ltd
Not strictly related to DCP-o-matic - but does anyone know a way to edit bitmap subtitle streams in e.g. VOBs from a DVD? DCP-o-matic allows to change size, position and color. Wondering wether it was possible to add a list view - and then, as once proposed for timed text, allow to edit in/out times, shift titles, erase individual titles?
Wondering wether there could be a way to turn this all compatible with PNG subtitles? After all, there is not so much difference in handling between bitmap subs and PNGs. Would be cool if both could be dealt with through the same interface!
- Carsten
When did this happen?!!!
Carl! How you dare not making a big announcement for it!
By the way, congratulations for finally getting rid of the
celluloid-thingy in a DCP-thingy logo...
Manuel AC
--
http://akadcp.com/https://www.facebook.com/akadcp
On Tue, 14 Feb 2017, GEORGE MAZARAKIS wrote:
> Hi Carl,
>
> I had encrypted SMPTE problems also with Doremi servers.
Come now ... tell me more!
Carl
>
> I'm sure for an IMS DOREMI with 2.6.6 version software and i think with
> DCP 2000.
>
> George
>
>
> On 14/2/2017 2:00 μμ, dcpomatic-request(a)carlh.net wrote:
> > Send DCPomatic mailing list submissions to
> > dcpomatic(a)carlh.net
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
> > or, via email, send a message with subject or body 'help' to
> > dcpomatic-request(a)carlh.net
> >
> > You can reach the person managing the list at
> > dcpomatic-owner(a)carlh.net
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of DCPomatic digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: Exporting a decryption certificate (Carl Hetherington)
> > 2. Re: SMPTE by default (Carl Hetherington)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Mon, 13 Feb 2017 21:46:10 +0000 (GMT)
> > From: Carl Hetherington <cth(a)carlh.net>
> > To: Tom Haines <thaines(a)specticast.com>
> > Cc: dcpomatic net carlh <DCPomatic(a)carlh.net>
> > Subject: Re: [DCP-o-matic] Exporting a decryption certificate
> > Message-ID: <alpine.DEB.2.11.1702132145380.4765(a)main.carlh.net>
> > Content-Type: text/plain; charset="utf-8"
> >
> > On Tue, 31 Jan 2017, Tom Haines via DCPomatic wrote:
> >
> >> Thanks everyone for the help. It turns out the mastering facility used the signing keys instead of the decrypting keys.
> >> The DKDM issued with the decrypting keys works.
> >>
> >> Interestingly, this did uncover a crash situation.
> >> 1. I created a new project
> >> 2. I imported the DCP using "Add Folder..."
> >> 3. Right clicked on the DCP in the content window selected Add KDM
> >> 4. Selected the original KDM the mastering facility incorrectly produced.
> >> 5. I receive the "An exception occurred: Could not decrypt KDM (error:0407A079:rsa routines:RSA_padding_check_PKCS1_OAEP:oaep decoding error)." error message
> >> 6. I clicked back on the imported DCP in the content window, and DoM crashed.
> >> This happened in 2.9.0 and 2.10.2 running on macOS Sierra 10.12.2.
> >>
> >> When I have a second today, I'll download the test build and see if it happens there as well.
> > Thanks Tom, I believe this bug is already on the to-do list. I will
> > investigate.
> >
> > All the best,
> > Carl
> >
> >
> >>
> >>
> >>
> >> SpectiCast
> >> Tom Haines :: Executive Director of Digital Cinema Services
> >>
> >> 210 W Rittenhouse Sq, Ste 400 | Philadelphia, PA 19103, USA
> >>
> >> Office: 215-618-3874 | Mobile: 484-269-8227 | Skype: tom.haines41
> >>
> >> Facebook | Twitter | Google+ | Instagram | Tumblr
> >>
> >>
> >> On Tue, Jan 31, 2017 at 7:25 AM, Tom Haines <thaines(a)specticast.com> wrote:
> >> At the moment it looks like the DKDM was issued against the signing veers and not the decrypting certainty.
> >>
> >> On Tue, Jan 31, 2017 at 3:03 AM Carsten Kurz via DCPomatic <dcpomatic(a)carlh.net> wrote:
> >> I remember that I had an issue after I had been working with, and updating DCP-o-matic for a long time on the same machine. I couldn't issue
> >> working certificates for a DKDM.
> >>
> >> 'Recreate certificates and keys' solved that issue. Something in preferences must have been mixed up over so many version updates.
> >>
> >> However, I guess before doing that, exporting the current chain and saving it under a name of the current date and DOM version before that may be
> >> a good idea. Depends on what you had been working on before.
> >>
> >> - Carsten
> >>
> >> _______________________________________________
> >> DCPomatic mailing list
> >> DCPomatic(a)carlh.net
> >> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
> >>
> >> --
> >> SpectiCast
> >> Tom Haines :: Executive Director of Digital Cinema Services
> >>
> >> 210 W Rittenhouse Sq, Ste 400 | Philadelphia, PA 19103, USA
> >>
> >> Office: 215-618-3874 | Mobile: 484-269-8227 | Skype: tom.haines41
> >>
> >> Facebook | Twitter | Google+ | Instagram | Tumblr
> >>
> >>
> >>
> >>
> > ------------------------------
> >
> > Message: 2
> > Date: Mon, 13 Feb 2017 21:57:24 +0000 (GMT)
> > From: Carl Hetherington <cth(a)carlh.net>
> > To: dcpomatic carlh net <dcpomatic(a)carlh.net>
> > Subject: Re: [DCP-o-matic] SMPTE by default
> > Message-ID: <alpine.DEB.2.11.1702132156160.4765(a)main.carlh.net>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hi Manuel,
> >
> > I think, on the whole, I'd like to wait a little longer: at least until
> > we've got to the bottom of the encrypted SMPTE problems with Sony systems.
> >
> > It's interesting to hear the state of the US big releases though: thanks!
> >
> > Regards,
> > Carl
> >
> >
> > On Thu, 19 Jan 2017, Manuel AC via DCPomatic wrote:
> >
> >> Just seeing the numbers from wide releases in US. Basically, non-SMPTE theaters are not relevant anymore. Some major studios are already nearly fully SMPTE,
> >> theaters that didn't do the minimal updates will do them now, for sure.
> >>
> >> I would insist in going back to default to SMPTE as the standard for new installs.
> >>
> >> Manuel AC
> >> --
> >> http://akadcp.com/
> >> https://www.facebook.com/akadcp
> >>
> >>
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > DCPomatic mailing list
> > DCPomatic(a)carlh.net
> > http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
> >
> >
> > ------------------------------
> >
> > End of DCPomatic Digest, Vol 54, Issue 2
> > ****************************************
>
>
Just seeing the numbers from wide releases in US. Basically, non-SMPTE
theaters are not relevant anymore. Some major studios are already nearly
fully SMPTE, theaters that didn't do the minimal updates will do them now,
for sure.
I would insist in going back to default to SMPTE as the standard for new
installs.
Manuel AC
--
http://akadcp.com/https://www.facebook.com/akadcp
If you send the cerificate chain they should be able to unchain it (
using an utulity which comes with qube , or manually)
and install the root and intermidiate certificates on windows using mmc.exe.
Then they can create DKDM for DoM using the pem cerificate
George
On 26/1/2017 1:28 πμ, dcpomatic-request(a)carlh.net wrote:
> Send DCPomatic mailing list submissions to
> dcpomatic(a)carlh.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
> or, via email, send a message with subject or body 'help' to
> dcpomatic-request(a)carlh.net
>
> You can reach the person managing the list at
> dcpomatic-owner(a)carlh.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of DCPomatic digest..."
>
>
> Today's Topics:
>
> 1. Re: Exporting a decryption certificate. (Carsten Kurz)
> 2. Re: Exporting a decryption certificate. (Tom Haines)
> 3. Re: Exporting a decryption certificate. (Carsten Kurz)
> 4. Re: Exporting a decryption certificate. (Carsten Kurz)
> 5. Re: Exporting a decryption certificate. (Tom Haines)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 25 Jan 2017 23:50:05 +0100
> From: Carsten Kurz <audiovisual(a)t-online.de>
> To: dcpomatic carlh net <DCPomatic(a)carlh.net>
> Subject: Re: [DCP-o-matic] Exporting a decryption certificate.
> Message-ID: <1BA06127-14B0-43EE-A89D-A5331B0A0513(a)t-online.de>
> Content-Type: text/plain; charset=us-ascii
>
>
> Am 25.01.2017 um 23:43 schrieb Tom Haines:
>
>> Other way around. They are mastering the DCP, and I need to decrypt it with DOM
> Okay, in this case you would need to use 'Export DCP encryption chain'. And hope that Qube Master Pro accepts DOMs root certificate/chain.
>
> - Carsten
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 25 Jan 2017 17:59:31 -0500
> From: Tom Haines <thaines(a)specticast.com>
> To: Carsten Kurz <audiovisual(a)t-online.de>
> Cc: dcpomatic carlh net <DCPomatic(a)carlh.net>
> Subject: Re: [DCP-o-matic] Exporting a decryption certificate.
> Message-ID:
> <CAAgw8C5kMZKk-JYj8gu7kDuOieBv2Nt1z4w11DcjwsvyRTpoqw(a)mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I can't find 'Export DCP encryption chain', but I did send him the result
> from 'Export DCP decryption certificate' and that's what caused him this
> error. Are they the same thing, or am I missing something?
>
> [image: SpectiCast] <http://www.specticast.com/> Tom Haines :: Executive
> Director of Digital Cinema Services
>
> 210 W Rittenhouse Sq, Ste 400 | Philadelphia, PA 19103, USA
>
> Office: 215-618-3874 | Mobile: 484-269-8227 | Skype: tom.haines41
>
> Facebook <https://www.facebook.com/SpectiCastEntertainment> | Twitter
> <https://twitter.com/Specticast> | Google+
> <https://plus.google.com/u/0/b/104757180246475600072/104757180246475600072/p…>
> | Instagram <http://instagram.com/specticast> | Tumblr
> <http://specticast.tumblr.com/>
>
> On Wed, Jan 25, 2017 at 5:50 PM, Carsten Kurz via DCPomatic <
> dcpomatic(a)carlh.net> wrote:
>
>> Am 25.01.2017 um 23:43 schrieb Tom Haines:
>>
>>> Other way around. They are mastering the DCP, and I need to decrypt it
>> with DOM
>>
>> Okay, in this case you would need to use 'Export DCP encryption chain'.
>> And hope that Qube Master Pro accepts DOMs root certificate/chain.
>>
>> - Carsten
>>
>>
>>
>> _______________________________________________
>> DCPomatic mailing list
>> DCPomatic(a)carlh.net
>> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://main.carlh.net/pipermail/dcpomatic/attachments/20170125/e9ec58e0/att…>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 26 Jan 2017 00:15:14 +0100
> From: Carsten Kurz <audiovisual(a)t-online.de>
> To: dcpomatic net carlh <DCPomatic(a)carlh.net>
> Subject: Re: [DCP-o-matic] Exporting a decryption certificate.
> Message-ID: <EF1E26B1-177A-47B8-9AF7-867A33A6A469(a)t-online.de>
> Content-Type: text/plain; charset=us-ascii
>
>
> Am 25.01.2017 um 23:59 schrieb Tom Haines:
>
>> I can't find 'Export DCP encryption chain', but I did send him the result from 'Export DCP decryption certificate' and that's what caused him this error. Are they the same thing, or am I missing something?
> Ooops.
>
> In my Preferences - Keys I have three options at the bottom of the dialog:
>
> Re_Make certificates and key
> Export DCP decryption certificate...
> Export DCP decryption chain...
>
> Ooops, it seems that button is indeed not there in 2.9... maybe upgrade to 2.10.2 or 2.10.6?
>
> 'Export Decryption certificate' will only export the leaf certificate of your DOM installation. Technically, the leaf is sufficient to create KDMs/DKDMs, but some software may require a full certificate chain, which is what the error message you posted seems to signal.
> Qube Master Pro may have a setting to override that behaviour and be happy with the leaf only, but I am not familiar with that software.
>
> - Carsten
>
>
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 26 Jan 2017 00:24:12 +0100
> From: Carsten Kurz <audiovisual(a)t-online.de>
> To: dcpomatic carlh net <DCPomatic(a)carlh.net>
> Subject: Re: [DCP-o-matic] Exporting a decryption certificate.
> Message-ID: <99FC8548-330F-4A47-A0A3-F7C7896B4EE9(a)t-online.de>
> Content-Type: text/plain; charset=us-ascii
>
>
> Am 25.01.2017 um 23:59 schrieb Tom Haines:
>
>> I can't find 'Export DCP encryption chain', but I did send him the result from 'Export DCP decryption certificate' and that's what caused him this error. Are they the same thing, or am I missing something?
> Carl - I could probably try this myself, but, assuming Tom want's to stay with 2.9 - can the decryption certificate chain also be generated by exporting the three individual Root/Intermediate/Leaf certificates in the upper part of the decryption certificate dialog segment, and simply concatenate them into a single file?
>
>
> - Carsten
>
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 25 Jan 2017 18:26:51 -0500
> From: Tom Haines <thaines(a)specticast.com>
> To: Carsten Kurz <audiovisual(a)t-online.de>
> Cc: dcpomatic net carlh <DCPomatic(a)carlh.net>
> Subject: Re: [DCP-o-matic] Exporting a decryption certificate.
> Message-ID:
> <CAAgw8C5yG0s=sPycBni1yS_nQai2diYG=Tt+sjFvpLjCge8Wvg(a)mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Wonderful. I upgraded to 2.10.2 and that option is now there. I exported
> the full chain and sent it along. I'll report back if it works.
>
> [image: SpectiCast] <http://www.specticast.com/> Tom Haines :: Executive
> Director of Digital Cinema Services
>
> 210 W Rittenhouse Sq, Ste 400 | Philadelphia, PA 19103, USA
>
> Office: 215-618-3874 | Mobile: 484-269-8227 | Skype: tom.haines41
>
> Facebook <https://www.facebook.com/SpectiCastEntertainment> | Twitter
> <https://twitter.com/Specticast> | Google+
> <https://plus.google.com/u/0/b/104757180246475600072/104757180246475600072/p…>
> | Instagram <http://instagram.com/specticast> | Tumblr
> <http://specticast.tumblr.com/>
>
> On Wed, Jan 25, 2017 at 6:15 PM, Carsten Kurz via DCPomatic <
> dcpomatic(a)carlh.net> wrote:
>
>> Am 25.01.2017 um 23:59 schrieb Tom Haines:
>>
>>> I can't find 'Export DCP encryption chain', but I did send him the
>> result from 'Export DCP decryption certificate' and that's what caused him
>> this error. Are they the same thing, or am I missing something?
>>
>> Ooops.
>>
>> In my Preferences - Keys I have three options at the bottom of the dialog:
>>
>> Re_Make certificates and key
>> Export DCP decryption certificate...
>> Export DCP decryption chain...
>>
>> Ooops, it seems that button is indeed not there in 2.9... maybe upgrade to
>> 2.10.2 or 2.10.6?
>>
>> 'Export Decryption certificate' will only export the leaf certificate of
>> your DOM installation. Technically, the leaf is sufficient to create
>> KDMs/DKDMs, but some software may require a full certificate chain, which
>> is what the error message you posted seems to signal.
>> Qube Master Pro may have a setting to override that behaviour and be happy
>> with the leaf only, but I am not familiar with that software.
>>
>> - Carsten
>>
>>
>>
>>
>> _______________________________________________
>> DCPomatic mailing list
>> DCPomatic(a)carlh.net
>> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://main.carlh.net/pipermail/dcpomatic/attachments/20170125/4ad2832a/att…>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> DCPomatic mailing list
> DCPomatic(a)carlh.net
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>
>
> ------------------------------
>
> End of DCPomatic Digest, Vol 53, Issue 20
> *****************************************
I am working with someone who is having an issue with importing
certificates that were exported from DCP-o-matic into QubeMaster Pro to
create a DKDM.
I exported the cert through "Export DCP decryption certificate..." in the
Keys tab in preferences on v2.9.0 for OS X.
When they import the .pem file I exported they receive the following error:
Certificate(s) validation in progress...
> "dcpomatic.smpte-430-2.LEAF(SHA256)" signer certificate chain is not
terminating in a root certificate
> "dcpomatic.smpte-430-2.LEAF(SHA256)" validation failed
> Result: KDM generation failed.
They believe the issue to be on my end. Any thoughts on what may be going
on?
[image: SpectiCast] <http://www.specticast.com/> Tom Haines :: Executive
Director of Digital Cinema Services
210 W Rittenhouse Sq, Ste 400 | Philadelphia, PA 19103, USA
Office: 215-618-3874 | Mobile: 484-269-8227 | Skype: tom.haines41
Facebook <https://www.facebook.com/SpectiCastEntertainment> | Twitter
<https://twitter.com/Specticast> | Google+
<https://plus.google.com/u/0/b/104757180246475600072/104757180246475600072/p…>
| Instagram <http://instagram.com/specticast> | Tumblr
<http://specticast.tumblr.com/>
Can anyone tell me what system AMC theaters uses? What projector and what server?
I need to format a drive to deliver a dcp to them.
Thanks,
John Putch
www.putchfilms.com
Dear
I want to create KDM using my laptop with new version of DOM, the DKDM from
my PC when i transcode DCP and export the DKDM to my laptop, but message
error :
*Could not decrypt KDM (error:04065072:rsa
rountines:RSA_EAY_PRIVATE_DECRYPT:padding check failed)*
please help, thanks :)
--
*Aditya*
+62811700073
http://www.indodcptools.com
*Your Cinema Solution*
Hello
I've used DCP-o-Matic on a Windows machine to create a DCP for a short film
I made. Worked great. I entered the short film in a film festival and got
accepted. They are asking me for a Linux compatible DCP. Do I need to
create the DCP on Linux for it to be Linux compatible?
Thanks
Joseph
On Jan 15, 2017, at 00:10 000AM, Joseph Verrico <jjverrico(a)gmail.com> wrote:
Turns out this was pretty easy using ubuntu linux.
Absolutely marvelous to hear. And now, it is Sunday. When is/was your screening? Was that a success as well?
Do any of the instructions need changing for accuracy or clarity?
Did you use any links that proved helpful?
Did you find a person to help you?
How long was the process once you started on the path?
Do any of the instructions need changing for accuracy or clarity?
C J Flynn
Cinema Test Tools <http://www.cinematesttools.com/>
> On Jan 15, 2017, at 00:10 000AM, Joseph Verrico <jjverrico(a)gmail.com> wrote:
>
> Turns out this was pretty easy using ubuntu linux.
>
> On Tue, Jan 10, 2017 at 9:07 PM, cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com> <cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com>> wrote:
> It’s good to be bold. Continue. cjf
>
>> On Jan 10, 2017, at 20:48 000PM, Joseph Verrico <jjverrico(a)gmail.com <mailto:jjverrico@gmail.com>> wrote:
>>
>> It's a 15 minute short film. I haven't created the DCP yet but I can't imagine its going to be larger than 5 GB. The MP4 is only 1 GB.
>>
>> I really appreciate your help on this. I am going to try to pull this off with the tools you've shared. If not, I will look for somebody to do it for me. I have until the end of the week so I have some time.
>>
>> Thanks again for your help. I may post other questions as I attempt this feat of strength.
>>
>> Joseph
>>
>> On Tue, Jan 10, 2017 at 8:36 PM, cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com> <cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com>> wrote:
>> Hi Joseph
>>
>> I have several Windows machines here, but they are set up for testing other applications. So I can’t test this for you now. (I do most everything on a Mac.)
>>
>> I’ve done a quick Google and a couple of ext2/ext3 drivers for Windows. One seemed open source and current <https://sourceforge.net/projects/ext2fsd/ <https://sourceforge.net/projects/ext2fsd/>>. One seemed low-cost and current <http://www.partition-tool.com/easeus-partition-manager/linux-partition-mana… <http://www.partition-tool.com/easeus-partition-manager/linux-partition-mana…>>. There might be others.
>>
>> They look simple to install and use.
>>
>> The other alternative – which is what many of us have on our Mac and Windows systems – is to download and install the free and open source Virtual Machine Manager “VirtualBox", then install the free and open sourced “Ubuntu" Operating System. Suddenly you are a Linux person. It may not be the thing to do now as you are trying to finish a project, but it only takes a few minutes to install each, then open the Terminal and put in the commands. It will take a few seconds with a hammer figuring out how to steal the USB drive from the Windows system to allow the Linux system to write to it, and another few to figure out how to create a share folder on your Windows drive to the Ubuntu, but it isn’t rocket surgery.
>>
>> My actual recommendation is to find a friend who can do this for you. Or wander the local college with a sign on your chest. It will take them seconds, plus the few minutes to transfer the data from one drive to the other.
>>
>> How big is your DCP that you need to put on the USB drive?
>>
>> C J Flynn
>> Cinema Test Tools <http://www.cinematesttools.com/>
>>
>>
>>> On Jan 10, 2017, at 19:48 000PM, Joseph Verrico <jjverrico(a)gmail.com <mailto:jjverrico@gmail.com>> wrote:
>>>
>>> Thank for the information. I was hoping I could format a USB memory stick to EXT2 on my Windows machine and then copy the DCP file structure onto that EXT2 formatted USB memory stick. I don't have Linux on my Windows machine. I don't know Linux. Is this possible?
>>>
>>> On Tue, Jan 10, 2017 at 5:01 PM, cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com> <cjflynn(a)digitaltesttools.com <mailto:cjflynn@digitaltesttools.com>> wrote:
>>> Leslie is correct that the DCP creation platform is not relevant.
>>>
>>> But I think it is a mistake to follow the advice of submitting your work on the opposite format of what the festival have asked for…even if they asked in an odd sort of way.
>>>
>>> It is true that some software versions of some media servers will accept FAT32. But there are some that don’t and the festival seems pretty specific about what they want. They do that because there is only one formatted drive specification that all cinema systems must use.
>>>
>>> That is the EXT2 that Leslie mentioned.
>>>
>>> And, make certain that if someone makes this drive for you that they make the inode size 128, since that is in the DCI and ISDCF and SMPTE specifications.
>>>
>>> And, if the drive was originally formatted in FAT32, you’ll be limited to a 4 Gig file size, regardless of the size of the drive. First format in exFAT, or leave it with NTSF if that is what it was bought as.
>>>
>>> Here is what I do.
>>> The ISDCF document gives the following command line in a linux type system.
>>>
>>> mkfs -t ext3 -I 128 -m 0 /dev/xddN
>>>
>>> with xddN being the drive ‘name’, which is most often something like ‘sdb1’ – you can find that name by the command
>>>
>>> sudo lsblk -o NAME,FSTYPE,SIZE,MOUNTPOINT,LABEL
>>>
>>> Then unmount with
>>>
>>> sudo umount /dev/sdb1
>>> And here are two other formatting commands that work. Myself, I prefer the last one since it allows me to name the partition as it is being made.
>>>
>>> sudo mke2fs -t ext3 -I 128 -L DCPs 0 /dev/sdb1 – slightly different command set
>>>
>>> sudo mkfs.ext3 -I 128 -m 0 -L your-chosen-name-of-drive /dev/sdb1 – this one adds a disk name (change "DiskName" to 'my_dcp_drive' or whatever name you want to give it) while formatting and partitioning...change that 'sdb1' to the proper partition number.
>>>
>>> Formatting the disk is not so quick – Those Superblocks might take a few minutes to assemble.
>>>
>>> Follow up by giving permissions to the drive with: (755 is usually recommended, but I use 777 for myself)
>>>
>>> sudo chmod -R 777 /media/Your_Login_USER_NAME/your-chosen-name-of-drive
>>>
>>> You might find that you need to change ownership
>>>
>>> sudo chown owner:owner /media/owner/your-chosen-name-of-drive
>>>
>>> I usually put my name twice, such as 'cj:cj', then '/media/cj/ctt_dcps'
>>>
>>> I hope this helps. I’d hate you to have a black screen after getting this far. Good luck. Tell us how it worked out and what you ended up doing.
>>>
>>> C J Flynn
>>> Cinema Test Tools <http://www.cinematesttools.com/>
>>>
>>>
>>>> On Jan 10, 2017, at 15:45 000PM, Leslie Hartmier via DCPomatic <dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>> wrote:
>>>>
>>>> No, the platform you use to create the DCP is not relevant. They may be wanting the content on a EXT2 drive.
>>>>
>>>> If it is small enough, you can provide it on a USB thumb drive formatted using FAT32. (Most USB drives come formatted that way.)
>>>>
>>>> Leslie
>>>> From: dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>
>>>> Sent: January 10, 2017 4:28 PM
>>>> To: dcpomatic(a)carlh.net <mailto:dcpomatic@carlh.net>
>>>> Reply-to: jjverrico(a)gmail.com <mailto:jjverrico@gmail.com>
>>>> Subject: [DCP-o-matic] DCP for Linux
>>>>
>>>> Hello
>>>>
>>>> I've used DCP-o-Matic on a Windows machine to create a DCP for a short film I made. Worked great. I entered the short film in a film festival and got accepted. They are asking me for a Linux compatible DCP. Do I need to create the DCP on Linux for it to be Linux compatible?
>>>>
>>>> Thanks
>>>>
>>>> Joseph
>>>> _______________________________________________
>>>> DCPomatic mailing list
>>>> DCPomatic(a)carlh.net <mailto:DCPomatic@carlh.net>
>>>> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic <http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic>
>>>
>>>
>>
>>
>
>
Am 07.01.2017 um 00:24 schrieb Alec Trupiano:
> Ok so this is from the MXF through VLC
And are you okay with that? At first sight, one would say that it's nice neutral black'nwhite. But some people actually intend a colored monochromatic lookc, e.g. sepia.
While VLC does a bad job of playing back DCPs, it seems the screen-grabs are nicely color corrected. So, if that is the color rendering you intended, your DCP should be fine on a DCP projector.
- Carsten
hello,
I recently created a DCP of my short film, but when I play it, the video
stutters by a LOT. I'm running a high end PC (Windows 7), playing the file
off a SSD. I'm trying to figure out asap if its an issue of my PC, the
player I'm using or the DCP file itself. The player is called DigitAll DCP
Player, and I'm awaiting a response from them on the issue. If its only an
issue of the player, I should be fine since I'm sure the venue at the
festival will have good enough hardware. If it's an issue with the DCP file
though, I really need this figured out in time for next week.
Thank you!
Hello Carl,
it is possible to make DCPs for BARRIER-FREE FILMS WITH DCP O MATIC?
Particular for blind people? We know that it needs a additional sound track.
We want to make it for a low Budget Arthouse Film. And we need to include a sound track for blind people.
Best regards,
Dominik
mail(a)dominik-friebel.com | www.dominik-friebel.com | +49(0)177 39 202 15
I assisted a Short-Film DCP conversion, they supplied 10 versions, of wich 9 are subtitled. Among those with special charsets, the greek and cyrillic versions seem to come out nicely, but the chinese version doesn't show any subtitles, just three dots per title in some cases. I have yet to see the source material for these subtitles, but anyway, does someone have experience with chinese subtitles and proper font/charset selection? These are SMPTE DCPs.
- Carsten
Hi,
A screening for this saturady is coming up and I am going nuts. I really need your advice please.
I have been using DCPoMATIC without any problem for DCP and KDMs. I’ve done both and have protected them without any problem.
Today I came back to do another KDM from a project in diplomatic and the button for the screens I have setup is greyed out. I do not understand this. The certificates (pen files) are good and in the dates are also ok in them.
My questions for trying to solve this:
1. Is it possible that the project has been corrupted?
2.Is there any way I can create a KDM if I have the key for the encrypted material?
3. Can you create a KDM of a DCP that has not yet been created as a whole cus of its metadata?
Thanks
Eduardo
(from Spain)
HI Carl, thank you for DCP-O-matic. Do you mean will by DCP with played
sound in near future? Thanks, regards Petr B.
--
Petr Baraňák, tel: 736 515 322
Studio Sklep Litvínov
web: http://petrbaranak.wix.com/studio-sklep
Hello!!
I need to add subtitles to an encrypted DCP. I know that with my software (NeoDCP) I can screen a supplemental DCP: I need to create a different DCP with only the subtitles' stream (no video, no audio).
Is it possibile with DCP o'MATIC?
Thank you
Federico
Hi all,
DCP-o-matic 2.10.1 is now available for download from
http://dcpomatic.com/download
Translations
Updated zh_CN translation from Rov (若文) and 刘汉源.
Updated nl_NL translation from Rob van Nieuwkerk.
Updated fr_FR translation from Thierry Journet.
Updated cs_CZ translation from Tomáš Begeni.
Updated de_DE translation from Carsten Kurz.
Updated es_ES translation from Manuel AC.
Updated ru_RU translation from Igor Voytovich.
Updated sv_SE translation from Adam Klotblixt.
Updated it_IT translation from Fabio "Zak" Belli.
Updated da_DK translation from Anders Uhl Pedersen.
New features
Allow some DNxHR files to be imported.
Show hints before making DCP (#823).
Basic template support (#485).
Support subtitles in imported DCPs.
Support generation and import of encrypted subtitles.
Support fade of subtitles (#923).
Support shadow in subtitles (#911).
Allow import of OV/VF DCPs (#906).
Allow configuration of MXF/CPL/PKL filenames (part of #710).
Add hints on what different DCP channel counts might be used for.
Add -t/--threads option to dcpomatic2_cli.
Do parallel digest calculation when there are multiple reels (#855).
Expand vertical size of servers list in preferences (#913).
Rearrange KDM creator windows in various (hopefully good) ways.
Allow configuration of KDM filename format.
Add button to export the whole DCP decryption certificate chain.
Simple mouseover in the video waveform (#932).
Make burnt-in subtitle outline width configurable (#940).
Add channel details to high-audio-level hints (#822).
Take the leaf of a certificate chain if one is provided for a screen certificate (#937).
Some UI improvements to the KDM dialog.
Add UTC+5:30 to cinema dialog.
Default to building Interop DCPs instead of SMPTE.
Add confirm dialogue for job cancellation.
Allow import of DCPs with multiple CPLs.
Bug fixes
Fix start-trim of audio-only content (#915).
Fix incorrect labelling of SMPTE audio MXFs causing validation fails in some cases.
Fix slow encodes when using negative audio delay in some circumstances.
Various fixes for separate L/R eye content.
Fix doubled-up subtitles in some cases when importing DCPs.
Fix mis-coloured burnt-in subtitles when using imported DCPs / MXFs.
Try to fix problems with corrupted configuration files.
Fix -r option to dcpomatic2_cli.
Fix occasional lock-up of DCP encoding when servers are in use.
Fix line-too-long errors from some email servers when sending KDM emails.
Fix audio mapping view labels when DCP audio channel counts change.
Improve rendering of outlined subtitles when burning in.
Fix disappearing subtitles when they contain HTML-ish markup.
Fix out-of-order subtitles when imported from DCP.
Fix loading of some old metadata versions.
Fix some random crashes on OS X.
Fix scrolling of the audio mapping view (#919).
Fix seeking through multi-reel imported DCPs.
Trim referred-to DCPs correctly using CPL entry point / duration.
Don't let hint generation throw an exception in the presence of old audio analysis files.
Disallow refer if the film frame size is not the same as the DCP (#963).
Fix multi-select in the timeline (#954).
Don't re-use J2K data if it's the wrong size (#964).
Fix overlapping burnt-in subtitles in some cases (#959).
Fix subtitle XML in some cases (#952).
Fix incorrect parsing of imported multi-reel DCPs with subtitles.
Fix errors on parsing times in some XML subtitle files.
Fix errors on creating 3D DCPs are greater than 60 frames per second.
Fix layout problems in the job view with long job details (#889).
Tweak layout of KDM from/until line under OS X (#926).
Provide correct parent to dialogue box to avoid z-order problems under OS X (part of #979).
Missing FFmpeg include; fixes #989.
Use the same ContextID whenever encrypting the picture asset for a
project; this ensures that resumption of encodes works. Before this, a
random ContextID would be created for each run (#980).
Thanks to Rov (若文), 刘汉源, Carsten Kurz, Rob van Nieuwkerk, Thierry
Journet, Tomáš Begeni, Manuel AC and Igor Voytovich.
We have added nineteen new supporters since 2.9.0: thanks to Brian
Mendelssohn, Richard Malmberg, Olov Östlund, Jean-Pierre Beauviala,
Vasiliy Popov, Anders Olsson, Andrea Maguolo, Stephen Furley, Central
Cinema, Mathew Johns, Marco Löber, Brett Friedman, P. Meijer, Dan Cohen,
Tomasz Jagi, Alabama Kino, Henrik Jäger, James Kirst and Fabio Bozzoli.
Thanks also to our regular monthly supporter Film.Ca Inc.
Hi Carl,
I made in the summer DCPs with 2.8.0 version and It was perfect.
And now with the 2.9.0 and 2.9.39 version, I have to redo some new versions with english subtitles and I have a lot of sound clicking problems.
I use the same 5.1 sound file.
Any ideas?
Best Regards.
Julien Climent
La Planète Rouge
83, av. de la Pointe Rouge
13008 MARSEILLE
France
+33698177663
www.laplaneterouge.fr