(This is from a previous tangental thread)

"When using DCP-o-Matic, I check if center channel "peak" is around -12db. Certainly not scientific enough but most of the time it ends with a normal human bearable audio level. It becomes more difficult to "predict" with 5.1 audio using phase inversion, as you need all the channels to get not only a good balance but something human-understandable…" Gérald MarucciaI have a 5.1 mix peaking at 0db.  Any advise on what to do.  I dont quite understand the 'I check if center channel "peak" is around -12db', well I understand what it means but dont know to do it in DCPOMatic.