ProRes is for *.mov, MP4/H.264 is for *.mp4. In "Output file" you should specify file name and path where to export.


--
Regards, Igor Voytovich


27 августа 2018, 16:19:03, от "Vidámi Péter" <headofproduction@adsservice.hu>:

Dear Igor, 

 Thank you for the notes, maybe you are right! I made more disk space, however I had 1 TB free space on the destination drive and over 100 GB on the main drive, where the operating system as well.

Now the computing digest started, so I could enter into the second part of the transcode. I will get back to you, if it is succsed. 

I am aware of the 50 Mbit is to low, just tryed to make DCP as fast as possible. However I am not aware how to export mp4 or other output than DCP,  in DCP-O-Matic. Could you let me know?

The DCP prewiew plays well on both computer. 

Best regards,
Péter


    Péter Vidámi
Head of Production
  ADS Service Kft.
H – 1112 Budapest Neszmélyi út 13./B.
Feladó: iva_co <iva_co@ukr.net>
Elküldve: 2018. augusztus 27., hétfő 15:12:02
Címzett: Vidámi Péter
Másolatot kap: Carl Hetherington; dcpomatic@carlh.net
Tárgy: Re[2]: Re[2]: Re[2]: [DCP-o-matic] DKDM problem

Thanks.

The lines in the log file
2018. 08. 27. 11:22:19: ERROR:
2018. 08. 27. 11:22:19: ERROR:
2018. 08. 27. 11:22:19: ERROR: Error in job:  ()
are not much informative. At least I don't see anything useful from them except it is a fact of error. I think Carl should take a look on it.

As far as I understand, your encrypted-DCP is located on disk H:\ and your unencrypted project is located on disk E:\.
I still have a feeling that you have low free space on target disk (E:\). How many free disk space did you have before starting "make DCP" process and after error appear?

I see you have reduced jpeg-2000 bandwidth from 100Mbit/s to 50Mbit/s. In my opinion this value is too low as for DCP. It is not the reason of the problem, just for note.

Is this DCP plays OK? Try to rewind it to problem time and play it. If it will play OK, I would try to export the DCP as mp4/mov just for test


--
Regards, Igor Voytovich



27 августа 2018, 15:35:49, от "Vidámi Péter" <headofproduction@adsservice.hu>:


Sure, please find it below:


I want to have unencrypted video files to cut trailers etc.

Best,
Péter

    Péter Vidámi
Head of Production
  ADS Service Kft.
H – 1112 Budapest Neszmélyi út 13./B.
ads_daddycool_kombo_alairas_v2


From: iva_co [mailto:iva_co@ukr.net]
Sent: Monday, August 27, 2018 2:12 PM
To: Vidámi Péter <headofproduction@adsservice.hu>
Cc: Carl Hetherington <cth@carlh.net>; dcpomatic@carlh.net
Subject: Re[2]: Re[2]: [DCP-o-matic] DKDM problem

Useful info can be found in the log file. Please attach it.
Also, why do you want to decrypt encrypted DCP?

--
Regards, Igor Voytovich


27 августа 2018, 14:38:01, от "Vidámi Péter" <headofproduction@adsservice.hu>:

Dear Igor,

Thank you for the suggestion!

I had enough disk space, and the progress still stopped. What it made is the attached one with the newest DCP-O-Matic.

Best regards,
Péter

    Péter Vidámi
Head of Production
  ADS Service Kft.
H – 1112 Budapest Neszmélyi út 13./B.
ads_daddycool_kombo_alairas_v2


From: iva_co [mailto:iva_co@ukr.net]
Sent: Monday, August 27, 2018 1:04 PM
To: Vidámi Péter <headofproduction@adsservice.hu>
Cc: Carl Hetherington <cth@carlh.net>; dcpomatic@carlh.net
Subject: Re[2]: [DCP-o-matic] DKDM problem

Do you have enough disk space to create the DCP?

--
Regards, Igor Voytovich



27 августа 2018, 13:59:26, от "Vidámi Péter via DCPomatic" <dcpomatic@carlh.net>:

Dear Carl, Dear Colleagues,

I have a new difficulty meanwhile I trying to decrypt a DCP.

I have received the DKDM to the leaf certificate, confirmed by Carl. You can find attached:

·         My certificate
·         The DKDM
·         The CPL file of the DCP
·         Error message

I imported the DCP then added the DKDM, and started to make a new DCP. It starts without any problem but around 70% it makes an error and stops. I have tried to re-download the DCP via Aspera again, but had the same issue. I have tried on 2 different Windows 10 computer one have Nvidia, other have is AMD video card, with the same DCP-O-Matic 2.12.6. And on the AMD computer there appeared the attached error message.

Could you please advise what to try? Or what can be the problem?

I have just updated the latest DCP-O-Matic to the Nvida computer, and trying the same process again, we will see, what happens.

Thank you in advance!

Best regards,
Péter

    Péter Vidámi
Head of Production
  ADS Service Kft.
H – 1112 Budapest Neszmélyi út 13./B.



-----Original Message-----
From: Vidámi Péter
Sent: Thursday, August 23, 2018 3:22 PM
To: 'Carl Hetherington' <cth@carlh.net>
Cc: dcpomatic@carlh.net
Subject: RE: [DCP-o-matic] DKDM problem

Thank you Carl, and sorry! :(

    Péter Vidámi
Head of Production
  ADS Service Kft.
H – 1112 Budapest Neszmélyi út 13./B.




-----Original Message-----
From: Carl Hetherington [mailto:cth@carlh.net]
Sent: Thursday, August 23, 2018 3:21 PM
To: Vidámi Péter <headofproduction@adsservice.hu>
Subject: RE: [DCP-o-matic] DKDM problem

Glad you got it sorted!

On Thu, 23 Aug 2018, Vidámi Péter wrote:

> Dear Carl,
>



>  It seems I have found have found the solution for this project, the conclusion is that the error is on my side, I have tried with a wrong DKDM, which was sent to an other project.
>



> Thank you very much anyway!
>



> Best regards,
> Péter
>



>     Péter Vidámi
> Head of Production
>   ADS Service Kft.
> H – 1112 Budapest Neszmélyi út 13./B.
>



>



>



>



> -----Original Message-----
> From: Vidámi Péter
> Sent: Thursday, August 23, 2018 2:10 PM
> To: Carl Hetherington <cth@carlh.net>
> Subject: RE: [DCP-o-matic] DKDM problem
>



> Dear Carl,
>



>  Thank you for your quick answer!
>



> Sure, please find attached the CPL.
>



> I made the certificate in DCP-o-Matic KDM generator, and modified inside "Keys tabs", in the "Advanced" section, the 3 first row, which is some kind of description of the certificate. Than exported the certificate, and sent to the lab who gave the (D)KDM. The interesting part is, that I have already received a working (D)KDM, which I was able to decrypt an other DCP, please find this DKDM attached as well.
>



> Best regards,
> Péter
>



>     Péter Vidámi
> Head of Production
>   ADS Service Kft.
> H – 1112 Budapest Neszmélyi út 13./B.
>



>



>



> -----Original Message-----
> From: Carl Hetherington [mailto:cth@carlh.net]
> Sent: Thursday, August 23, 2018 1:54 PM
> To: Vidámi Péter <headofproduction@adsservice.hu>
> Subject: Re: [DCP-o-matic] DKDM problem
>



>



> > I would like to ask you for a bit help. I have made a certificate, which you can see attached, and received a (D)KDM for it, you can see attached as well.
>



> How did you make the certificate?
>



> Can you send the CPL file from your DCP?
>



> > Maybe I received the KDM for the wrong certificate to the wrong chain part? Leaf instead of root, or backward?
>



> It looks like the KDM is made for the leaf certificate, which is right.
>



> Best,
> Carl
>



>



>



>



> >
> > What is the main way I have to receive the KDM? Root, inter or key?
> >
> >  
> >
> > Thank you for your hopefully quick reply!
> >
> >  
> >
> > Best regards from Budapest,
> >
> > Péter VIDÁMI
> >
> >  
> >
> >     Péter Vidámi
> >
> > Head of Production
> >
> >   ADS Service Kft.
> >
> > H – 1112 Budapest Neszmélyi út 13./B.
> >
> >
> >
> >
> > ads_daddycool_kombo_alairas_v2
> >
> >  
> >
> >  
> >
> >
> >
>



_______________________________________________




DCPomatic mailing list




DCPomatic@carlh.net




http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic