Ok, thanks.

I've proceeded 2 runs on 3 cores. Things go relatively smoother and even faster than before (sic...).

I.e: 3x100% CPU and memory goes up to >800M but never reached 1G. Power reaches a hudge 3W...!

I can still access the Pi thru SSH to run htop. Much better...

I now see only 128 elements to build with "--disable-gui" option, which makes about 30% less work to achieve assuming all files need the same delay to be built.

I still get a lot of warnings about swp{b} deprecated for ARMv6 & 7.

And finally, build went twice to 23/128 (ffmpeg_content) but failed each time at this point.

Carl, can I post log files in order for you to see what's going on? what file(s)??

Fred

De: "Carl Hetherington via DCPomatic" <dcpomatic@carlh.net>
À: dcpomatic@carlh.net
Envoyé: Vendredi 15 Mai 2015 19:19:06
Objet: Re: [DCP-o-matic] <DKIM> Re: dcpomatic on Raspberry Pi / Raspian
You only need --target-arm on configure.
./waf clean
Removes all build files.
Cheers,
Carl

On May 15, 2015 4:47:31 PM GMT+01:00, Fred via DCPomatic <dcpomatic@carlh.net> wrote:
>Latest news:
>
>It seems that up to 3 cores, processing build is Ok. May be only 2
>cores is more secure as 3 makes memory getting a bit high, even if it
>seems to stay behind the 1G limit.
>4 cores is for sure too much for the Pi.
>
>A few more questions (as for compiling, I'm a noob...):
>- do I need to specify again "--target-arm" for the build process?
>- how can I flush the previous build process to start again with a
>clean setup?
>
>Thanks,
>Fred
>
>----- Mail original -----
>
>De: "Fred via DCPomatic" <dcpomatic@carlh.net>
>À: "Carl Hetherington" <cth@carlh.net>
>Cc: dcpomatic@carlh.net
>Envoyé: Vendredi 15 Mai 2015 16:25:39
>Objet: <DKIM> Re: [DCP-o-matic] <DKIM> Re: Re : Re: dcpomatic on
>Raspberry Pi / Raspian
>
>
>
>----- Mail original -----
>
>De: "Carl Hetherington via DCPomatic" <dcpomatic@carlh.net>
>À: dcpomatic@carlh.net
>Envoyé: Vendredi 15 Mai 2015 16:15:02
>Objet: Re: [DCP-o-matic] <DKIM> Re: Re : Re: dcpomatic on Raspberry Pi
>/ Raspian
>
>Hi Fred,
>
>Sorry, I misunderstood. Build with
>./waf -j1
>to only use 1 core.
>
>I'll try this as soon as build fails...
>
>Concerning Boost, I don't remember exactly where I got this packages.
>But I know that you had to do something in the code and asked me to
>specify "--target-arm" to get configure passed.
>
>I'm starting a new test following your latest instructions:
>sudo ./waf configure --disable-gui --target-arm => Ok
>sudo ./waf build --disable-gui => in progress
>
>Thanks,
>Fred
>
>
>
>_______________________________________________
>DCPomatic mailing list
>DCPomatic@carlh.net
>http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>DCPomatic mailing list
>DCPomatic@carlh.net
>http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic

_______________________________________________
DCPomatic mailing list
DCPomatic@carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic