20 Oct
2019
20 Oct
'19
2:11 p.m.
Hi,
Sorry, forgot to add: Yes I tried adding the IP:s for the other subnet
manually. It didn't work unfortunately, the servers were not found.
On Sun, Oct 20, 2019 at 3:37 PM Carsten Kurz via DCPomatic
<dcpomatic(a)carlh.net> wrote:
I think there is an older thread on the forum regarding this. I haven't tried two
separate networks yet, but this forum post suggests that at least it did work with some
version.
Did you try adding the encoding servers on the second network manually, or is
auto-discovery your main concern?
- Carsten
Am 20.10.2019 um 01:40 schrieb Mattias Mattsson via DCPomatic:
--
-mattias
Hi!
I am running DoM on a computer with two network cards, eth0 and eth1.
eth0 is on the 192.168.0.0/24 subnet and eth1 on 192.168.241.0/24.
Encode servers started on the 192.168.0.0/24 subnet are found
automatically by DoM, but none of the servers on 192.168.241.0/24. I
am sure there is connectivity on this subnet between the DoM encoding
computer and the clients (ping and ftp works among other things).
Is there a way to instruct DoM which network interfaces and/or subnets
to listen on? It would be useful to have it listen on several
subnets/interfaces as well.
Thanks!
Best,
--
-mattias
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic