Thanks, I seem to remember the default was 2.35, will give 2.2 a go. I
installed NeoDCP and it is great for testing DCPs. It showed up the audio
problems nicely.
Toms description of gamma fitted into by understanding. I guess we are
talking about input gamma, how does output gamma work, seems to be 2.6
default.
In terms of the trimming it looked like it did not work, created the whole
DCP.
Ben
On 7 August 2014 17:22, Tom Rovak <trovak(a)comcast.net> wrote:
I should clarify. The whites from the mid to
approximately 80 IRE would be
pushed up. The brightest areas of white, roughly 85-100 IRE would not be
affected. Same with the blacks. Rough estimations. It would depend a bit on
the source. But it is an overall shift.
*Tom Rovak - Executive Producer / Sr. Colorist / Post Production
SupervisorROVAK COLORIST SERVICESA Division Of The Annex Studios**Commercials,
Feature Films, Music Videos, Long Form*
*Color Correction, Dailies, Editorial, Finish/VFX*
*trovak(a)comcast.net* <trovak(a)comcast.net>
*(815)690-8323 <%28815%29690-8323>Website / Commercial Reel:
http://colorist-rovak.com/ <http://colorist-rovak.com/>*
------------------------------
*From: *"Ben Edwards" <list4me2(a)gmail.com>
*To: *"dcpomatic carlh net" <DCPomatic(a)carlh.net>
*Sent: *Thursday, August 7, 2014 9:44:03 AM
*Subject: *[DCP-o-matic] Tested first mayor DCP, few issues
So I managed to create a DCP of the first 30 mins of the feature I am
DCPing and get it on a ext3 drive. Ingested and plays fine but there are
a few problems.
Firstly the audio is pooping in some places, We have a Dolby CP750 and
setting it between 3.5-4 seems about right for this DCP. This is very low
so I guess I have made the DCP to loud but the popping surprises me, is
this normal if the DCP is too loud. Looking at the audio graphs in
DCPOMatic it looked like it was peeking about -12 db. I guess the best
thing is to use the level calculator and make 3.5 come out as 5. The 5.1
is mixed to 0db and I had a -1db audio tweek in DCPOMatic.
The other issue is that there seem to be some blown whites. I have been
trying to find out what the grading was set up for but used 2.4 as they are
being non responsive (I have been told it is Rec.709). What effect is
using 2.2 or 2.6 going to have. If I go to 2.6 am I correct in thinking
the image will go darker. The thing is there are some very dark scenes. My
understanding is that at the ends of brightness (very dark and bright)
changes in the gamma curve used have the least effect. i did ask if the
whites where ever meant to be blown (its a found footage mockumentery) and
the answer was no. Any advice?
Regards,
Ben
--
*Ben Edwards, Video Editor and Cameraman*
*web*:*www.nkytwig.com* <http://funkytwig.com/>* mobile:**07773 02 44 82*
*skype**:**funkytwig** twitter:**@funkytwig*
<https://twitter.com/funkytwig>iContact Community Video
<http://www.icontactvideo.org/> | Bristol Community Channel
<http://bristol.mirocommunity.org/>
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
--
*Ben Edwards, Video Editor and Cameraman*
*web*:*www.nkytwig.com* <http://funkytwig.com/>* mobile:**07773 02 44 82*
*skype**:**funkytwig** twitter:**@funkytwig*
<https://twitter.com/funkytwig>iContact Community Video
<http://www.icontactvideo.org/> | Bristol Community Channel
<http://bristol.mirocommunity.org/>