[DCP-o-matic] Tested first mayor DCP, few issues

So I managed to create a DCP of the first 30 mins of the feature I am DCPing and get it on a ext3 drive. Ingested and plays fine but there are a few problems. Firstly the audio is pooping in some places, We have a Dolby CP750 and setting it between 3.5-4 seems about right for this DCP. This is very low so I guess I have made the DCP to loud but the popping surprises me, is this normal if the DCP is too loud. Looking at the audio graphs in DCPOMatic it looked like it was peeking about -12 db. I guess the best thing is to use the level calculator and make 3.5 come out as 5. The 5.1 is mixed to 0db and I had a -1db audio tweek in DCPOMatic. The other issue is that there seem to be some blown whites. I have been trying to find out what the grading was set up for but used 2.4 as they are being non responsive (I have been told it is Rec.709). What effect is using 2.2 or 2.6 going to have. If I go to 2.6 am I correct in thinking the image will go darker. The thing is there are some very dark scenes. My understanding is that at the ends of brightness (very dark and bright) changes in the gamma curve used have the least effect. i did ask if the whites where ever meant to be blown (its a found footage mockumentery) and the answer was no. Any advice? Regards, Ben -- *Ben Edwards, Video Editor and Cameraman* *web*:*www.nkytwig.com* <http://funkytwig.com/>* mobile:**07773 02 44 82* *skype**:**funkytwig** twitter:**@funkytwig* <https://twitter.com/funkytwig>iContact Community Video <http://www.icontactvideo.org/> | Bristol Community Channel <http://bristol.mirocommunity.org/>