16 May
2013
16 May
'13
3:31 p.m.
Hi !
The same joke happened to me long ago, also with openDCP.
There has to be an even number of tracks.
With Doremi DCP2000 servers if you have only one channel, you'll have no
error displayed but only kind of hurting pink noise while playing back.
Since I'm used to always fill with silence tracks. And therefore it
would be very comfortable if silent track were created automatically...
Bravo again...
Gérald.
Le 16/05/2013 14:04, Magnus Eriksson a écrit :
Hi there, new problems (and problem solved)
The source file this time was messy. A scanned 16mm documentary from
the past. Sound was mono, but in the source file it was panned hard
left in Dolby AC3 (2-channel). Right was silent.
I pulled the AC3-track, converted it to mono (wav) and put it as
external audio into DVD-o-matic on center channel. The other channels
were left unchecked. DCP seemed OK, ingested fine on Dolby DSS200/220
(4.6.0 (13)) no problems when selecting it for playback but when
hitting play everything crapped out. "No connection with Cat745",
"Transport not available" and so on.
Wasn´t there something about the allowed number of tracks in a DCP
package? Hm.
New try. This time I made an extra soundtrack with digital silence
from the mono track. Checked every channel in external audio. Sound on
center, silence on the other five. The DCP played just fine.
Would it be possible for DVD-o-matic to automatically create silent
tracks where needed when using external audio?
*/Magnus Eriksson*
_______________________________________________
DVDomatic mailing list
DVDomatic(a)carlh.net
http://carlh.dnsalias.org/cgi-bin/mailman/listinfo/dvdomatic