Hi Lilian [snip certificate problems] Thanks. That should be fixed in version 1.11. Can you give a recipe to repeat this? What OS are you using? I've updated it and it is linked from here: http://dcpomatic.com/i18n.php Thanks! Carl

Hi Carl. I just tried the 64-bit Linux version of DCP-O-Matic 1.11 on my Ubuntu 12.10 test machine (100% updated) It crashes on clicking the 'OK' button when exiting the Preferences menu. It crashes no matter if I change any parameters or just enter the menu and immediately exit it. Best regards, Jonathan On Sun, Oct 13, 2013 at 4:57 PM, Jonathan K. F. Jensen &lt;jkf.jensen(a)gmail.com > Hi Carl. > > I sent you the below mail on the carl(a)dcpomatic.com address, but I'll > mirror it here in case someone else has the same problem. > > I was testdriving your freshly released v1.10 of DCP-O-Matic this > afternoon. > After encoding the Big Buck Bunny trailer, I got an error regarding > openssl (see attached screenshot). > Not just did this error occur, but it halted the process, so no metafiles > were ever created. > Only the two MXF files were created. > > I closed the program, an re-opened it, then encoded the Sintel short with > almost the same parameters and got the same error. > > I've zipped and attached the 'log' and 'metadata.xml' files from the bbb > trailer encode to this mail. > > FYI, I had another OpenSSL version installed, but after uninstalling that, > I ran another bbb encode with the same error. > > > *UPDATE* (while writing this mail): I just tried running openssl.exe > from the commandline and got this: > c:\Program Files\DCP-o-matic\bin>openssl.exe > WARNING: can't open config file: C:\programs\OpenSSL-Win64\bin\openssl.cfg > > That's the path of my old OpenSSL installation. > I looked for openssl.cfg in this folder: c:\Program Files\DCP-o-matic\bin\ > but no such file exists there. > > Seems like the openssl.cfg is missing from the package. > > *UPDATE II: *I just did the same test encoding the bbb trailer with the > 1.11 version. Same error: *Sun Oct 13 16:29:57 2013: Transcode job failed > (error in C:\Program Files\DCP-o-matic\bin\openssl.exe genrsa -out ca.key > 2048* > * > * > However, when running the command manually in commandline, openssl > actually generates the ca.key file (with the 'missing cfg file' error, but > the key file is generated!). > * > * > I hope you can use this info!* > * > > Best regards, Jonathan > * > * > > > On Thu, Oct 10, 2013 at 2:06 AM, Carl Hetherington &lt;cth(a)carlh.net> >> >> Hi all, >> >> DCP-o-matic version 1.10 is now available from here: >> >> http://dcpomatic.com/download.**php <http://dcpomatic.com/download.php> >> >> The main improvement in this version is that it can write encrypted DCPs >> and generate KDMs for them. All feedback is welcome. >> >> Best regards >> Carl >> >> ______________________________**_________________ >> DVDomatic mailing list >> DVDomatic(a)carlh.net >> http://carlh.dyndns.org/cgi-**bin/mailman/listinfo/dvdomatic<http://carl… >> > >

Hi, Sorry for the lack of information. I was talking about the colour conversion preferences (see attached capture) I did not try with earlier version as I'm pointing the actual version issue... Lilian

Hi Lilian Can we get any more detail on that...? I'm not sure what you mean. Regards Carl On Sat, 19 Oct 2013, lilian lefranc wrote:

Hi Lilian, On Sat, 19 Oct 2013, lilian lefranc wrote: Thanks, that's clear. The non-saving should be fixed in recent versions; let me know if you still have problems there. The sometime failure to load in the conversions has been seen by other people; I'm looking into it with another user for whom it is repeatable. Regards Carl

When I change the value in the video tab, it works fine. But when I want to select a customised lut saved in preferences, it is not present in the list. When I open the program after creating a customised lut, it is not present any more. Hope it is more understandable... Le 19/10/2013 19:31, Carl Hetherington a écrit :