13 Jun
2015
13 Jun
'15
8:06 p.m.
Hi all,
I have made a beta test release of DCP-o-matic version 2. It is not ready for general use
yet, but testing would be most welcome. You can install it alongside an existing version
1, so you can carry on using 1.x for important work.
You can see details of version 2 here:
http://dcpomatic.com/v2
Any comments or bug reports are welcome to carl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
I would be grateful to hear any reports of success as well as failure.
With best regards,
Carl
18 Jun
18 Jun
10:54 a.m.
Hello,
First "little" test for the moment.
I've made a DCP from one still .tif image to a 9 seconds duration.
*First : thanks for the fade in / fade out settings !!! It is just SO
useful !*
So what did I notice so far ?
- previewing : it does not stop on latest image and goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
- it took 30 seconds to transcode that DCP - with fade in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
- colour conversion was by default set to sRGB.
- no icon set for dcp-o-matic-v2 maybe intended to prevent confusion ?
I'm running DCP-o-Matic-v2 under Ubuntu 14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
Hi all,
I have made a beta test release of DCP-o-matic version 2. It is not ready for general
use yet, but testing would be most welcome. You can install it alongside an existing
version 1, so you can carry on using 1.x for important work.
You can see details of version 2 here:
http://dcpomatic.com/v2
Any comments or bug reports are welcome to carl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
I would be grateful to hear any reports of success as well as failure.
With best regards,
Carl
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
1:01 p.m.
Hi Gérald,
Thanks for doing some tests!
- previewing : it does not stop on latest image and
goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
Fixed in 2.1.4.
- it took 30 seconds to transcode that DCP - with fade
in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
Yes, I would expect so. With fades it encodes each faded frame
separately, instead of re-using the same frame all the way through the
DCP.
- colour conversion was by default set to sRGB.
At the moment that's the default for still image inputs, as a best
guess.
- no icon set for dcp-o-matic-v2 maybe intended to
prevent confusion ?
Should be fixed in 2.1.4.
Thanks again,
Carl
I'm running DCP-o-Matic-v2 under Ubuntu 14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
Hi all,
I have made a beta test release of DCP-o-matic version 2. It is not ready for general
use yet, but testing would be most welcome. You can install it alongside an existing
version 1, so you can carry on using 1.x for important work.
You can see details of version 2 here:
http://dcpomatic.com/v2
Any comments or bug reports are welcome to carl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
I would be grateful to hear any reports of success as well as failure.
With best regards,
Carl
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
19 Jun
19 Jun
2:38 p.m.
You are amazing !
No more graph for sound level in v2 ? Ooops no sorry, it only has moved
from content-audio tab to dcp-audio tab. As long as we can see the
graphs while adjusting db-level… but how does it work now if many
contents ? Anyway it seems broken now (v2.1.5) no graph displayed, with
one video + one still image.
Going on testing…
Le 18/06/2015 15:01, Carl Hetherington via DCPomatic a écrit :
Hi Gérald,
Thanks for doing some tests!
- previewing : it does not stop on latest image
and goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
Fixed in 2.1.4.
- it took 30 seconds to transcode that DCP - with
fade in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
Yes, I would expect so. With fades it encodes each faded frame
separately, instead of re-using the same frame all the way through the
DCP.
- colour conversion was by default set to sRGB.
At the moment that's the default for still image inputs, as a best
guess.
- no icon set for dcp-o-matic-v2 maybe intended
to prevent confusion ?
Should be fixed in 2.1.4.
Thanks again,
Carl
I'm running DCP-o-Matic-v2 under Ubuntu
14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
> Hi all,
>
> I have made a beta test release of DCP-o-matic version 2. It is not ready for
general use yet, but testing would be most welcome. You can install it alongside an
existing version 1, so you can carry on using 1.x for important work.
>
> You can see details of version 2 here:
>
> http://dcpomatic.com/v2
>
> Any comments or bug reports are welcome to carl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
>
> I would be grateful to hear any reports of success as well as failure.
>
> With best regards,
> Carl
>
> _______________________________________________
> DCPomatic mailing list
> DCPomatic(a)carlh.net
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
2:49 p.m.
Problem with name of the DCP seems to remain :
instead of being based on the folder name, it's named AUDIO_and_so_on.
Le 19/06/2015 16:38, Gérald Maruccia via DCPomatic a écrit :
You are amazing !
No more graph for sound level in v2 ? Ooops no sorry, it only has
moved from content-audio tab to dcp-audio tab. As long as we can see
the graphs while adjusting db-level… but how does it work now if many
contents ? Anyway it seems broken now (v2.1.5) no graph displayed,
with one video + one still image.
Going on testing…
Le 18/06/2015 15:01, Carl Hetherington via DCPomatic a écrit :
Hi Gérald,
Thanks for doing some tests!
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic - previewing : it does not stop on latest image
and goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
Fixed in 2.1.4.
- it took 30 seconds to transcode that DCP - with
fade in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
Yes, I would expect so. With fades it encodes each faded frame
separately, instead of re-using the same frame all the way through the
DCP.
- colour conversion was by default set to sRGB.
At the moment that's the default for still image inputs, as a best
guess.
- no icon set for dcp-o-matic-v2 maybe intended
to prevent confusion ?
Should be fixed in 2.1.4.
Thanks again,
Carl
I'm running DCP-o-Matic-v2 under Ubuntu
14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
> Hi all,
>
> I have made a beta test release of DCP-o-matic version 2. It is not ready for
general use yet, but testing would be most welcome. You can install it alongside an
existing version 1, so you can carry on using 1.x for important work.
>
> You can see details of version 2 here:
>
> http://dcpomatic.com/v2
>
> Any comments or bug reports are welcome tocarl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
>
> I would be grateful to hear any reports of success as well as failure.
>
> With best regards,
> Carl
>
> _______________________________________________
> DCPomatic mailing list
> DCPomatic(a)carlh.net
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
4:26 p.m.
Hi Gérald,
I'm not sure what you mean about the problem with the name of the DCP... can you
clarify?
Regards,
Carl
On Fri, 19 Jun 2015 16:49:24 +0200
Gérald Maruccia via DCPomatic <dcpomatic(a)carlh.net> wrote:
Problem with name of the DCP seems to remain :
instead of being based on the folder name, it's named AUDIO_and_so_on.
Le 19/06/2015 16:38, Gérald Maruccia via DCPomatic a écrit :
You are amazing !
No more graph for sound level in v2 ? Ooops no sorry, it only has
moved from content-audio tab to dcp-audio tab. As long as we can see
the graphs while adjusting db-level… but how does it work now if many
contents ? Anyway it seems broken now (v2.1.5) no graph displayed,
with one video + one still image.
Going on testing…
Le 18/06/2015 15:01, Carl Hetherington via DCPomatic a écrit :
Hi Gérald,
Thanks for doing some tests!
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic - previewing : it does not stop on latest image
and goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
Fixed in 2.1.4.
- it took 30 seconds to transcode that DCP - with
fade in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
Yes, I would expect so. With fades it encodes each faded frame
separately, instead of re-using the same frame all the way through the
DCP.
- colour conversion was by default set to sRGB.
At the moment that's the default for still image inputs, as a best
guess.
- no icon set for dcp-o-matic-v2 maybe intended
to prevent confusion ?
Should be fixed in 2.1.4.
Thanks again,
Carl
I'm running DCP-o-Matic-v2 under Ubuntu
14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
> Hi all,
>
> I have made a beta test release of DCP-o-matic version 2. It is not ready for
general use yet, but testing would be most welcome. You can install it alongside an
existing version 1, so you can carry on using 1.x for important work.
>
> You can see details of version 2 here:
>
> http://dcpomatic.com/v2
>
> Any comments or bug reports are welcome tocarl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
>
> I would be grateful to hear any reports of success as well as failure.
>
> With best regards,
> Carl
>
> _______________________________________________
> DCPomatic mailing list
> DCPomatic(a)carlh.net
> http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
11:34 p.m.
Hi Gérald,
On Fri, 19 Jun 2015, Gérald Maruccia via DCPomatic wrote:
No more graph for sound level in v2 ? Ooops no sorry,
it only has moved from content-audio tab to dcp-audio tab. As long as we can see the
graphs while adjusting
db-level… but how does it work now if many contents ? Anyway it seems broken now (v2.1.5)
no graph displayed, with one video + one still image.
The audio analysis now reflects the audio that is going into the DCP: i.e.
it is the sum of all the content that contains audio.
It was broken in 2.1.5 but should return in 2.1.7 which will be up
shortly. Do let me know if you still have problems with that version.
Best regards,
Carl
Going on testing…
Le 18/06/2015 15:01, Carl Hetherington via DCPomatic a écrit :
Hi Gérald,
Thanks for doing some tests!
- previewing : it does not stop on latest image and goes beyond. Of
course there is nothing "new" displayed but the frame-count grows and
grows until I really stopped reading.
Fixed in 2.1.4.
- it took 30 seconds to transcode that DCP - with fade in and fade out
of 18frames long. That same kind of DCP (without fade in / out) used to
take much less time to transcode - between 1 and 3 seconds. Is this
because of fade ?
Yes, I would expect so. With fades it encodes each faded frame
separately, instead of re-using the same frame all the way through the
DCP.
- colour conversion was by default set to sRGB.
At the moment that's the default for still image inputs, as a best
guess.
- no icon set for dcp-o-matic-v2 maybe intended to prevent confusion ?
Should be fixed in 2.1.4.
Thanks again,
Carl
I'm running DCP-o-Matic-v2 under Ubuntu 14.04.
Best regards,
Gérald.
Le 13/06/2015 22:06, Carl Hetherington via DCPomatic a écrit :
Hi all,
I have made a beta test release of DCP-o-matic version 2. It is not ready for general
use yet, but testing would be most welcome. You can install it alongside an e
xisting version 1, so you can carry on using 1.x for important work.
You can see details of version 2 here:
http://dcpomatic.com/v2
Any comments or bug reports are welcome to carl(a)dcpomatic.com, or to Mantis
(http://dcpomatic.com/mantis).
I would be grateful to hear any reports of success as well as failure.
With best regards,
Carl
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
_______________________________________________
DCPomatic mailing list
DCPomatic(a)carlh.net
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
3670
days inactive
3676
days old
6 comments
2 participants
participants (2)
-
Carl Hetherington -
Gérald Maruccia