Hi Carl,
That did the trick. I did try an uninstall but I didn't check that the
folder was actually deleted. After deleting the folder it installed as
expected.
/Joop
Den 2017-06-01 kl. 11:47, skrev Carl Hetherington:
Hi Joop,
Can you go in and just delete c:\Program Files\DCP-o-matic 2 and see what
happens then?
Kind regards,
Carl
On Thu, 1 Jun 2017, Joop de Gruiter via DCPomatic wrote:
> Hi all,
>
> I have the same issue when I try to install the 64 bit version (2.10.5) on 64
> bit Windows 7. I have also tried 2.11.9 and 2.9.0 with the same result.
>
>
>
> /Joop
>
>
> Den 2017-05-31 kl. 18:11, skrev Markus Kalb via DCPomatic:
>> Hi
>>
>> Please Check :
>>
>> * Can you install other Windows Software that uses similar install
>> processes? Maybe Test be Installing 7zip which seems to use similar
>> install procedures.
>> * Are you loged in using an windows Admin account (Needed for writing to
>> C:\Program Filed)
>> * Which Version of DCP-o-Matic are you using. Please test the
>> Beta/Testing Version and maybe even a older one. Just to make sure if
>> these are working.
>> * 32/64 bit ? Did you pick the correct Version of DCP-o-Matic ?
>> * Virus Tools: Already mentioned by C J Flynn. With the Advent of the
>> Ransomwares more and more Tools block normal write access to dirs
>> where programs can later be executed of.
>> * Could you make a screencast video of your install trys and make it
>> available?
>>
>>
>>
>>
>> Cjflynn--- via DCPomatic writes:
>>
>>> I only use dcp-o-matic on a Mac, but I just downloaded and installed both
>>> 64 and 32 bit versions on this little Windows 10 PC here, and they both
>>> installed correctly.
>>>
>>> I can’t help any further than that, but I can say that there is no obvious
>>> reason why the basic DOM install shouldn’t work.
>>> Do you have install privileges on this computer? Do you have a virus
>>> checker or something like that which prevents .dll files from installing?
>>>
>>> What version OS are you running? Is it up to date? Is there some quick
>>> utility that you can run to make sure the software internals are not
>>> compromised?
>>>
>>> Good luck from Van Nuys, CA
>>>
>>> C J Flynn
>>> Cinema Test Tools <http://cinematesttools.com/>
>>>
>>>
>>>> On May 30, 2017, at 12:51 000PM, Kinothek Stuttgart via DCPomatic
>>>> <dcpomatic(a)carlh.net> wrote:
>>>>
>>>> Hello together,
>>>> sorry for taking your time. Perhaps you can answer me, if you are so
>>>> kind. Thank you very much.
>>>> We are using DCP-o-matic for a long time, exclusively till now for
>>>> making slides without audio tracks.
>>>> There were no problems. Just till now. After received error messages, we
>>>> uninstalled the whole program,
>>>> and we installed it new (site:
dcpomatic.com
<http://dcpomatic.com/>).
>>>> After downloading and doing the whole procedure
>>>> (>executing>setup wizard>licence agreement>destination folder
C:\Program
>>>> Files\DCP-o-matic 2>choose components)
>>>> there is a window with the error message: “Error opening file for
>>>> writing” (C:\Programfiles\DCP-o-matic2\bin\libintl-8.dll),
>>>> then the installing process doesn´t continue (Can´t write).
>>>> What´s wrong?
>>>> Perhaps there´s a little link for it, otherwise I have to instruct my
>>>> system supervisor to have a look.
>>>> Kind regards from Stuttgart.
>>>> Kinothek Stuttgart.
>>>> Asangstrasse 15.
>>>> 70329 Stuttgart.
>>>> P.S. : Is it the problem to do a registration?
>>>> _______________________________________________
>>>> DCPomatic mailing list
>>>> DCPomatic(a)carlh.net <mailto:DCPomatic@carlh.net>
>>>>
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>>>> <http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic>
>>> _______________________________________________
>>> DCPomatic mailing list
>>> DCPomatic(a)carlh.net
>>>
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>> --
>> Markus Kalb
>> Filmkreis an der TU Darmstadt
>>
>> _______________________________________________
>> DCPomatic mailing list
>> DCPomatic(a)carlh.net
>>
http://main.carlh.net/cgi-bin/mailman/listinfo/dcpomatic
>
>
>