Hi all,
I just made made a DCP an got the following warnings in logfile for which I could’nt find any explanation.
Would be very happy is some of you can help me out if these warnings affect the quality of the final DCP and if I can assume that the DCP will be OK.
So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 19808)
So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 20035)
So 17 Jun 09:06:04 2018: WARNING: Butler video buffers reached 51625 frames (audio is 20035)
And I also got a lot of these messages:
Sa 16 Jun 23:05:52 2018: Writer full; pushes 2229 to disk while awaiting 1948
Sa 16 Jun 23:05:52 2018: Writer full; pushes 2230 to disk while awaiting 1948
…
…
Thank you in advance and have a nice day.
Christian
Hi Carl,
I keep getting this error message from dcp. It's the first time I've seen this message and I've been using DCP for over a year now..
I've tried on 2 different computers. Both PC and Mac, and both are giving me the same error message.
I'm in a bit of a crunch as I have ads that have to start playing at our theatre before tomorrow. Any help is greatly appreciated!
Thanks,
Bethany Nelson I Assistant Manager
Office: 931.762.5885 I Cell: 931.242.1224 I bethany(a)nelsonavp.com
<mailto:rickylee@nelsonavp.com>
Nelson Studios<http://www.nelsonavp.com/> I 2356 Springer Road I Lawrenceburg, TN 38464
Hi all,
I'm trying to open DCPomatic Player 2 (version 2.12.5) on a mac i7 with
current software and it keeps hanging on "Verifying..." but then eventually
opens after about 5 minutes.
I've used it before and not had this issue. I just re-installed and same
issue. Hmm.
Anyone else with experiencing this?
Thanks!
Joaquin
Hello,
I’m running into an issue with a xml subtitle file. Dcp-o-matic (2.12.4) seems to be unable to read the & sign in the xml file.
In the XML file I have;
<dcst:Subtitle SpotNumber="13" TimeIn="00:07:01:05" TimeOut="00:07:07:18" FadeUpTime="00:00:00:00" FadeDownTime="00:00:00:00">
<dcst:Text Hposition="0.0" Halign="center" Valign="bottom" Vposition="12.5" Direction="ltr">When house & techno arrived in the UK,</dcst:Text>
<dcst:Text Hposition="0.0" Halign="center" Valign="bottom" Vposition="8.0" Direction="ltr">people started throwing illegal parties.</dcst:Text>
In DCP-o-matic I only see the second sentence (the first sentence is ignored);
people started throwing illegal parties.
Best regards,
Lennert
Got 1G lan, 1 master, 3 slaves. Slaves are E5-2687W’s @ 3 GHz.
Master is seeing all 3 slaves in encoding servers list (with threads info 48).
Source material is 12-bit tiffs with 9 MB each.
We’re seeing a lot less throughput than expected: ~ 6 fps. On the slaves status says ~ 0.1 - 0.2 fps respectively.
Log messages on the slaves’ status panes have a lot of “error during async_read ([numbers 10009 and 10054 mostly])” messages.
Occasionally logs list an encoded frame with roughly these numbers:
receive up to 23 seconds, encode 1 second, send up to 1 second.
What could we check?
Kind regards, Wolfgang
Hi,
I made dcp format for the cinema, but in the cinema they can't play it correctly. The colors are different (the picture below).
I don't have already any idea how to fix it.
Could you please help me?
Thank you!
Dusan
> Could not make DLP
> Boost::Filesystem::Create_directory:Can not create a file when the file already exists:
> “C:\Users\Galle\onedrive\documents\”
This seems to be a Microsoft OneDrive issue, so for now, don't create DCP-o-matic projects within a OneDrive folder. Create projects/DCPs in a different directory, and if for some reason you want them to be synced with OneDrive, copy/move them to OneDrive later after finishing.
- Carsten
Hi there,
When you did File -> New and you saw this box:
https://dcpomatic.com/manual/html/screenshots/video-new-film.png
what does it say next to "create in folder" and what did you put in for
"film name" ?
Sorry for all the questions --- we are just trying to work out what is
going wrong.
All the best,
Carl
On Wed, 18 Apr 2018, Gallery Cinemas wrote:
>
> I started a new file
> found what I wanted in pictures
> Clicked on it, and everything was fine until I went to create
>
>
>
> the file is in location C:\galle\documents\joel
> Opens with Photos (.jpg)
> 324.9 kb
> 2310x864
>
>
> I have photographed a number of signs & poster etc, saved them to this file and it has always worked, until now.
>
> Sorry, this is the best I can do now
>
> Joel K. Pell
>
> Gallery Cinemas
> 396 Old Hartford Rd.
> Colchester, Ct. 06415
>
> tel: 860-537-6682
> fax: 860-537-6645
>
> email: gallerycinemas(a)sbcglobal.net
>
>
> On Tuesday, April 17, 2018 6:34 PM, Carl Hetherington <cth(a)carlh.net> wrote:
>
>
> What folder did you specify when you did File -> New ?
>
> On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote:
>
> > I would need you to send instructions on how to do that
> >
> > Joel Pell
> > Gallery Cinemas
> >
> >
> >
> >
> > On Tue, Apr 17, 2018 at 6:19 PM -0400, "Carl Hetherington" <cth(a)carlh.net> wrote:
> >
> > Can you send me the metadata.xml file from inside your project's folder?
> >
> > On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote:
> >
> > > yes, it happened Make DLP, that's where that message popped up
> > >
> > > Joel Pell
> > > Gallery Cinemas
> > >
> > >
> > >
> > >
> > > On Tue, Apr 17, 2018 at 6:09 PM -0400, "Carl Hetherington" wrote:
> > >
> > > Were you creating a new project? Adding content? Did you just click "Make
> > > DCP"?
> > >
> > > On Tue, 17 Apr 2018, Gallery Cinemas wrote:
> > >
> > > > Sorry, always worked fine for me. Then it didn't work. I deleted it and downloaded again, but got the same message
> > > >
> > > > Joel K. Pell
> > > >
> > > > Gallery Cinemas
> > > > 396 Old Hartford Rd.
> > > > Colchester, Ct. 06415
> > > >
> > > > tel: 860-537-6682
> > > > fax: 860-537-6645
> > > >
> > > > email: gallerycinemas(a)sbcglobal.net
> > > >
> > > >
> > > > On Tuesday, April 17, 2018 5:10 PM, Carl Hetherington wrote:
> > > >
> > > >
> > > > Hi there,
> > > >
> > > > Can you describe what you did that lead up to this error?
> > > >
> > > > Thank you,
> > > > Carl
> > > >
> > > > On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote:
> > > >
> > > > >
> > > > > I am having issues with your program
> > > > >
> > > > >
> > > > >
> > > > > Could not make DLP
> > > > >
> > > > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists:
> > > > >
> > > > > “C:\Users\Galle\onedrive\documents\”
> > > > >
> > > > >
> > > > >
> > > > > Sent from Mail for Windows 10
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
>
Am 17.04.2018 um 18:00 schrieb Gallery Cinemas via DCPomatic:
>
> Boost::Filesystem::Create_directory:Can not create a file when the file already exists:
> “C:\Users\Galle\onedrive\documents\”
Could this be a specific onedrive issue?
Sounds as if he wants to overwrite an existing DCP, but instead of the DOM confirm overwrite dialog, onedrive does something on it's own?
Joel - can you try to create that project somewhere else, e.g. on your desktop?
- Carsten
Can you send me the metadata.xml file from inside your project's folder?
On Tue, 17 Apr 2018, gallerycinemas(a)sbcglobal.net wrote:
> yes, it happened Make DLP, that's where that message popped up
>
> Joel Pell
> Gallery Cinemas
>
>
>
>
> On Tue, Apr 17, 2018 at 6:09 PM -0400, "Carl Hetherington" <cth(a)carlh.net> wrote:
>
> Were you creating a new project? Adding content? Did you just click "Make
> DCP"?
>
> On Tue, 17 Apr 2018, Gallery Cinemas wrote:
>
> > Sorry, always worked fine for me. Then it didn't work. I deleted it and downloaded again, but got the same message
> >
> > Joel K. Pell
> >
> > Gallery Cinemas
> > 396 Old Hartford Rd.
> > Colchester, Ct. 06415
> >
> > tel: 860-537-6682
> > fax: 860-537-6645
> >
> > email: gallerycinemas(a)sbcglobal.net
> >
> >
> > On Tuesday, April 17, 2018 5:10 PM, Carl Hetherington wrote:
> >
> >
> > Hi there,
> >
> > Can you describe what you did that lead up to this error?
> >
> > Thank you,
> > Carl
> >
> > On Tue, 17 Apr 2018, Gallery Cinemas via DCPomatic wrote:
> >
> > >
> > > I am having issues with your program
> > >
> > >
> > >
> > > Could not make DLP
> > >
> > > Boost::Filesystem::Create_directory:Can not create a file when the file already exists:
> > >
> > > “C:\Users\Galle\onedrive\documents\”
> > >
> > >
> > >
> > > Sent from Mail for Windows 10
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
